期刊文献+

碳纤维增韧ZrC-SiC陶瓷基复合材料制备工艺研究现状 被引量:6

Research Progress in Fabrication of Carbon Fiber Reinforced ZrC-SiC Ceramic Matrix Composites
下载PDF
导出
摘要 碳纤维增韧ZrC-SiC陶瓷基复合材料解决了ZrC单相陶瓷断裂韧性低、中低温阶段抗氧化性能差以及氧化气氛下碳纤维耐温不足等问题,是发展耐超高温、抗热震、耐烧蚀以及抗氧化的一种潜在候选材料。概述了碳纤维增韧陶瓷基复合材料的增韧机理,综述了制备工艺的最新研究成果,展望了碳纤维增韧ZrC-SiC陶瓷基复合材料的发展趋势。 Carbon fibers (Cf) reinforced ZrC-SiC ceramic matrix composites are potential candidates for developing high temperature resistance, thermal shock resistance, ablation resistance and oxidation resistance, solving the problems of low fracture toughness and low oxidation resistance in the middle low temperature of ZrC ceramics as well as no enduring high temperature of Cf for oxidizing atmosphere. The toughening mechanisms of Cf reinforced ceramic matrix composites are described. Recent research progress in preparation of Cf reinforced ZrC-SiC ceramic matrix composites is reviewed. It also makes a prospect for Cf reinforced ZrC-SiC ceramic matrix composites.
作者 尹凯俐 周立娟 魏春城 杨赞中 YIN Kaili;ZHOU Lijuan;WEI Chuncheng;YANG Zanzhong(Shandong University of Technology, School of Materials science and Engineering, Zibo 255049, Shandong, Chin)
出处 《陶瓷学报》 CAS 北大核心 2018年第2期132-137,共6页 Journal of Ceramics
基金 山东省自然科学基金(ZR2016EMM19 ZR2014JL032) 山东省科技发展计划(2014GZX201008)
关键词 ZrC-SiC 碳纤维 增韧 制备工艺 ZrC-SiC carbon fber toughness preparation techniques
  • 相关文献

参考文献4

二级参考文献48

  • 1刘军,熊翔,王建营,黄伯云.耐超高温材料研究[J].宇航材料工艺,2005,35(1):6-9. 被引量:19
  • 2韩杰才,胡平,张幸红,孟松鹤.超高温材料的研究进展[J].固体火箭技术,2005,28(4):289-294. 被引量:58
  • 3张立同,成来飞.连续纤维增韧陶瓷基复合材料可持续发展战略探讨[J].复合材料学报,2007,24(2):1-6. 被引量:204
  • 4曹建岭,徐强,朱时珍,王富耻,赵俊峰,倪川浩,冯超.烧结温度对ZrB_2-SiC超高温陶瓷致密化的影响[J].稀有金属材料与工程,2007,36(A02):171-173. 被引量:6
  • 5刘超,刘兵,邵友林,唐春和.高温气冷堆包覆燃料颗粒ZrC涂层的研究进展[J].稀有金属材料与工程,2007,36(A03):674-678. 被引量:5
  • 6马宝霞,张幸红,韩杰才,韩文波.热压烧结ZrC-SiC-C_g复相陶瓷的组织与力学性能[J]稀有金属材料与工程,2009(S2).
  • 7B. Pierrat,M. Balat-Pichelin,L. Silvestroni,D. Sciti.High temperature oxidation of ZrC–20%MoSi 2 in air for future solar receivers[J]. Solar Energy Materials and Solar Cells . 2011 (8)
  • 8Liyou Zhao,Dechang Jia,Xiaoming Duan,Zhihua Yang,Yu Zhou.Low temperature sintering of ZrC–SiC composite[J]. Journal of Alloys and Compounds . 2011 (41)
  • 9Sean E. Landwehr,Gregory E. Hilmas,William G. Fahrenholtz,Inna G. Talmy,Stephen G. DiPietro.Microstructure and mechanical characterization of ZrC–Mo cermets produced by hot isostatic pressing[J]. Materials Science & Engineering A . 2008 (1)
  • 10Diletta Sciti,Stefano Guicciardi,Mats Nygren.Spark plasma sintering and mechanical behaviour of ZrC-based composites[J]. Scripta Materialia . 2008 (6)

共引文献14

同被引文献83

引证文献6

二级引证文献41

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部