摘要
采用正交试验法,通过动态性能测试研究了304金属橡胶/硅橡胶发射筒底座减振器缩比件的设计和加工。结果表明：设计加工金属橡胶/硅橡胶复合材料减振器的工艺方法是可行的;304金属橡胶/硅橡胶减振器的动态损耗因子高于0.45,能满足设计要求,这可为1∶1减振器原件的设计和加工提供参考。
The design and processing of 304 metal rubber/silastic damper shrinkage part for emitter base were studied by orthogonal test and dynamic performance test. The results show that, it is feasible to design and process metal rubber/silastic composite damper. The dynamic loss factor of the 304 metal rubber/silastic damper is higher than 0.45, which exceeds the design requirement of 0.2, which provides reference for the design and processing of 1：1 damper.
作者
赵程
高长银
ZHAO Cheng;GAO Changyin(School of Electical and Mechanical Engineering, Zhengzhou University of Aeronautics, Zhengzhou 450046, Chin)
出处
《热加工工艺》
CSCD
北大核心
2018年第8期100-102,共3页
Hot Working Technology
基金
河南省教育厅重点项目(14A430016)
