期刊文献+

单段加压浸出的可行性讨论

Discussion on the feasibility of single stage pressure leaching
下载PDF
导出
摘要 本文主要在总结两段加压浸出的经验下,尝试单段加压浸出的可行性。结论 :液固比:4~5/1;酸锌摩尔比:1.1/1;釜压:1.1mpa;温度:150±5℃;木质素:0.3%;反应时间:1.5h^2h;在综合条件下,锌的浸出率可达到97%以上,溶液中锌含量可达到150g/L以上,铁含量在3g/L^5g/L,浸出液终酸为15g/L^20g/L。 In this paper, the feasibility of single stage pressure leaching is attempted under the experience of two sections of pressure leaching. Conclusion: the liquid-solid ratio: 4 ~ 5/1; acid zinc molar ratio: 1.1/1; reactor pressure: 1.1 MPa; temperature: 150-5 DEG C; lignin: 0.3%; reaction time: 1.5 H ~ 2 H; in general conditions, the leaching rate of zinc can reach more than 97%, zinc content in the solution can reach more than 150 g/L, iron the content of 3 g/L ~ 5 g/L, final acid leaching solution is 15 g/L ~ 20 g/L.
作者 刘宝 宋亚利 LIU Bao, SONG Ya-li(Sichuan Huili Xin Sha zinc industry limited liability company, Liangshan 615105,Chin)
出处 《世界有色金属》 2018年第2期236-237,共2页 World Nonferrous Metals
关键词 单段加压浸出 湿法冶炼 硫化锌精矿 single stage pressure leaching wet smelting zinc sulfide concentrate
  • 相关文献

参考文献3

二级参考文献11

  • 1王吉坤 冯桂林 徐晓军.有色金属选矿冶金和加工技术[M].昆明:云南省科技出版社,2001..
  • 2《化工百科全书》编辑委员会 化学工业出版社《化工百科全书》编.化工百科全书 18卷[M].北京:化学工业出版社,1998.1-29.
  • 3邱竹贤.有色金属冶金学[M].冶金工业出版社,2007:25-36.
  • 4邱竹贤.铝电解[M].冶金工业出版社,2008:89-106.
  • 5傅崇说.有色冶金原理[M].冶金工业出版社,2001:34-58.
  • 6华一新.有色金属冶金概论[M].冶金工业出版社,2007:48-66.
  • 7孙永会.含铬制革污泥堆浸-萃取分离技术研究[D].陕西科技大学学报,2008:44-46.
  • 8杨杰.回收有色冶金废渣中有价金属的研究[J].新疆有色金属,2012,35(4):72-72. 被引量:9
  • 9董英.高铁硫化锌精矿冶炼工艺探讨[J].云南冶金,2000,29(4):26-29. 被引量:21
  • 10李英利.试论湿法冶金企业机械设备防腐蚀的对策[J].商情,2013(10):105-105. 被引量:3

共引文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部