期刊文献+

结构对Sm2Ce2O7-YSZ热障涂层残余应力及热冲击性能的影响 被引量:5

Influence of Coating-Structure on Residual and Shocking Thermal-Stress of Sm2Ce2O7-YSZ Thermal Barrier Coatings
下载PDF
导出
摘要 采用ANSYS软件分析了涂层结构对Sm2Ce2O7-YSZ热障涂层热应力的影响。结果表明,在涂层表面存在较大的残余热应力和热冲击应力。径向残余热应力从试样中心至边沿逐渐降低,轴向和剪切残余应力在试样边沿明显增大。径向冲击应力与径向残余应力分布相似,但远大于径向残余应力。轴向冲击应力在试样边沿从压应力转变为拉应力,剪切冲击应力则急剧降低。涂层层数的增加有利于降低涂层的残余应力和冲击应力。 Influence of coating-structure on residual stress and thermal-shocking stress in Sm2Ce2O7-YSZ thermal barrier coatings was studied by ANSYS software. Results show that there are relatively high residual and shocking thermalstress in the current thermal barrier coatings. Radial residual stress decreases gradually form sample center to edge, and axial and shear residual stresses increase obviously at the sample edge. The distribution of radial shocking thermal stress is similar to that of radial residual stress, and the value of radial shocking stess is significantly larger than radial residual-stress. The axial shocking-stress transforms into tensile stress from compressive stress at sample edge, and the shear shocking-stress decreases abruptly. The residual and shocking thermal stresses can be reduced by increasing coating layers.
作者 赵让乾 赵永涛 张红松 李刚 李振军 ZHAO Rangqian, ZHAO Yongtao, ZHANG Hongsong, LI Gang, LI Zhenjun(School of Mechanical Engineering, Henan Institute of Engineering, Zhengzhou 451191, Chin)
出处 《中国陶瓷》 CAS CSCD 北大核心 2018年第5期59-64,共6页 China Ceramics
基金 河南省高校科技创新团队(18IRTSTHN005) 河南省科技发展计划项目(172102210208) 郑州市科技攻关计划项目(153PKJGG135) 河南工程学院博士基金项目(D2014015)
关键词 热障涂层 涂层结构 残余热应力 冲击热应力 Thermal barrier coatings Coating structure Residual thermal stress Shocking thermal stress
  • 相关文献

参考文献4

二级参考文献72

  • 1K. Kishitake,H. Era,S. Baba. Tensile strength of plasma-sprayed alumina and/or zirconia coatings on titanium[J] 1995,Journal of Thermal Spray Technology(4):353~357
  • 2X.Q.Cao,R.Vassen,D.Stoever. Ceramic materials for thermal barrier coatings[J]. Journal of the European Ceramic Society,2004,24:1-10.
  • 3Z. H. Song, W. Yuan, L. Gang,et al. Investigation about thermal conducttvities of LaCe207 doped with calcium or magnesium for thermal barrier coatings[J]. Journal of Alloys and Compotmds,2012,537: 141-146.
  • 4H. Dai, X. H. Zhong, J. Y. Li, et al. Neodymium-cerium oxides as new thermal barrier coatings material,Surf. Coat. Technol. 201 (2006) 2527-2533.
  • 5S. J. Patwe, B. R. Ambekar, A. K. Tyagi. Synthesis, characterization and lattice thermal expansion of some compounds in the system GdzCexZrE_xOT,J.Alloys. Compd.389 (2005)243-246.
  • 6Z.H.Song,L.J.Guo,L.Gang,et al.Investigation about thermophysical properties of Ln2Ce207 (Ln=Sm,Er and Yb) oxides for thermal barrier coatings,Mater.Res.Bull.47 (2012)4181-4186.
  • 7R. Va en,M. O.Jarligo,T.Steinke. Overview on advanced thermal barrier coatings[J].Surface and Coatings Technology, 2010,205: 938-942.
  • 8X.Q.Jun.Residual stress analysis of functional gradient materials[J].Mechanics Research Communications, 1999, 26..55-60.
  • 9E.Celik,O.Sarikaya.The effect on residual stress of porosity in plasma sprayed MgO-ZrO2 coatings for an internal combustion diesel engine[J].Materials Science and Engineering, 2004, A379:11-16.
  • 10K.A.Khor,Y.W.Gu.Effect of residual on the performance of plasma sprayed functionally graded ZrO/NiCoCrA1Y coatings[Jl.Materials Science and Engineering,2000,A277: 64-76.

共引文献31

同被引文献48

引证文献5

二级引证文献31

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部