摘要
利用PIPENET软件中的消防模块对马来RAPID项目消防水系统进行水力校核。将整个消防水系统分为水喷淋系统和消防主管网两部分,采用最远端算法,先分别对5个单元15组水喷淋系统进行计算,再将水喷淋系统与消防主管网连接成整体,对整体消防水系统进行工况校核。校核内容主要包括水喷淋系统流量、管道水流速、消防主管网接口流量及压力等参数。校核过程中通过调整管径等方式对设计内容进行优化,最终使消防水系统设计结果满足项目及国际规范要求。
PIPENET Spray/Sprinkler module is used in the hydraulic calculation of the fire water system of RAPID project in Malaysia,which includes the calculation of parameters of each deluge valve and fire water main pipe network using most remote nozzle way. 15 groups of deluge valves in five units are calculated separately and then connected with fire water main pipe network to check the working conditions of the whole fire system. The parameters include the flow rate of deluge valve,the water velocity in pipeline,the interface flow and pressure of fire water main pipe network and so on. By adjusting the pipe diameter to optimize the design contents,the design of fire water system can meet the requirements of the project and international standards.
出处
《石油化工设计》
CAS
2018年第2期15-18,共4页
Petrochemical Design
