摘要
以偏氟乙烯(VDF)、六氟丙烯(HFP)和三氟丙基二甲基硅烷基丙烯醚(第三单体)为原料,采用乳液聚合法合成三元氟橡胶生胶,将生胶与补强剂、结构控制剂以及交联剂混炼后,硫化为含特殊第三单体的耐低温氟橡胶。研究了引发剂类型、第三单体含量、聚合压力和聚合温度对制备得到的耐低温氟橡胶性能的影响并进行了相应的分析。
VDF、HFP and trifluoropropyldimethylsilylpropenylether were used as the raw material to prepare the low temperature fluororubber. In this paper,the influence of the initiator type,the third monomer content,polymerization pressure and polymerization temperature on the fluororubber performance,especially the low temperature resistance were studied.
作者
张冰冰
司林旭
李佳琦
吴君毅
Zhang Bingbing;Si Linxu;Li Jiaqi;Wu Junyi(Inner Mongolia Alhop Fluoroehemieal New Materials Development Co., Ltd., Wulanchabu 012000, China;Changshu 3F Zhonghao New Chemical Materials Co., Ltd., Changshu 215522, China)
出处
《有机氟工业》
CAS
2017年第2期4-7,共4页
Organo-Fluorine Industry
基金
国家863计划支持项目
项目编号2013AA032301
关键词
引发剂类型
第三单体含量
聚合温度
聚合压力
initiator type
the third monomer content
polymerization temperature
polymerization pressure