摘要
研究超高强度4+3×0.35ST钢丝帘线的性能,并用其取代3+8×0.33HT钢丝帘线用于全钢载重子午线轮胎带束层。结果表明,与3+8×0.33HT钢丝帘线相比,4+3×0.35ST钢丝帘线具有直径和线密度小、渗胶性能好等优点;将4+3×0.35ST钢丝帘线用于带束层,可在保证成品轮胎各项性能的同时,减小轮胎质量,降低制造成本。
The performance of 4+3×0.35ST super high strength steel cord and its application in the belt of truck and bus radial tire to replace 3+8 × 0.33HT steel cord were studied. The results showed that, compared with 3+ 8 × 0.33HT steel cord, 4+3×0.35ST steel cord possessed smaller diameter, lower linear density, and better rubber penetration property. With 4+3×0.35ST steel cord in the belt layer, the tire weight and cost were reduced, and at the same time the tire performance was good.
作者
刘兴华
胡湘琦
蒋中凯
LIU Xinghua;HU Xiangqi;JIANG Zhongkai(Guizhou Tire Co. , Ltd, Guiyang 550008, Chin)
出处
《轮胎工业》
CAS
2018年第3期174-176,共3页
Tire Industry