摘要
研究了不同轧制工艺对TA15钛合金薄板显微组织和力学性能的影响。结果表明,经均匀化处理在α＋β相区换向包覆叠轧轧制后可以获得晶粒尺寸均匀细小、力学性能均匀的TA15钛合金薄板。
The influences of different rolling process on the microstructure and mechanical properties of the TA15 titanium alloy sheet were studied.The results show that TA15 titanium alloy sheet with fine uniform grain size and uniform mechanical properties can be obtained by homogenization treatment and cladding rolling with reverse direction in α＋β phase region.
作者
杨健
党鹏
郝亚鑫
欧阳文博
齐亮
YANG Jian;DANG Peng;HAO Yaxin;OUYANG Wenbo;QI Liang(Western Titanium Technologies Co., Ltd., Xi＇an 710201, China)
出处
《热加工工艺》
CSCD
北大核心
2018年第11期157-159,共3页
Hot Working Technology
关键词
TA15钛合金
薄板
显微组织
力学性能
TA 15 titanium alloy
sheet
microstructure
mechanical properties
