摘要
河南某金选厂矿石主要为细粒嵌布含金硫化矿,为了实现矿石中金的高效回收,降低生产成本,本研究根据含金硫化矿原矿性质特点,采用柱机联合一粗一精一扫浮选工艺,对其进行了半工业试验。通过条件试验确定了最佳试验参数。当试验原矿品位为5.11 g/t时,试验最终得到回收率88.80%、品位为65.77 g/t的合格精矿。试验结果表明在试验回收率与工业相当的前提下,半工业浮选工艺具有提高金精矿品位约10.00 g/t并缩短工艺流程的优势。
The ore of a gold processing plant in Henan province are mainly t-me-disseminated gold-bearing sulfide ore. In order to achieve efficient recovery of gold from ore and reduce production costs ,this research was done based on characteristics of the gold-bearing sulfide ore, and the semi-industrial testt was processed with column machine combination-one roughing, one scavenging, one cleaning. The optimum parameters of experiment were determined by condition tests. When ore grade is 5.11 g/t, the semi-industrial test finally obtained qualified concentrate which recovery rate was 88.80%,and the concentrate grade was 65.77 g/t. The result shows that based on the similar recovery of industry and semi industry, semi-industrial flotation process can improve the grade of gold concentrate about 10.00 g/t and shorten the process.
作者
王晴
马子龙
曹亦俊
许亚军
邓洋洋
Wang Qing;Ma Zilong;Cao Yijun;Xu Yajun;Deng Yangyang(School of Chemical Engineering ＆ Technology, China University of Mining ＆ Technology, National Engineering Research Center of Coal Preparation ＆ Purification, Xuzhou, Jiangsu, Chin)
出处
《矿产综合利用》
CAS
北大核心
2018年第3期52-56,共5页
Multipurpose Utilization of Mineral Resources
基金
国家自然科学基金青年基金资助项目(51204178)：国家科技支撑计划课题一赤铁矿反浮选尾矿二次分选关键技术研究与工艺系统(2014BABOIB05).
关键词
含金硫化矿
柱机联合
半工业试验
Gold-bearing sulfide ore
Column machine combination
Semi-industrial test
