摘要
贵州某锰矿储量大、品位低,为使该矿得到合理开发利用,本文通过化学分析、物相分析、扫描电镜、X射线分析和MLA等方法进行了系统的工艺矿物学研究,在此基础上制订出适合该矿的选矿工艺流程,在原矿含Mn9.52%条件下,通过一粗一扫强磁选,可得到锰品位15.56%,回收率85.54%的良好指标,为该矿的高效利用奠定了技术基础。
Aiming at the characteristics for low-grade and rich- reserves in a manganese from Guizhou in order to make a reasonable development and utilization of the mine, the process of mineralogy was studied by chemical analysis, phase analysis, scanning electron microscopy, X-ray analysis and MLA, to develop a suitable for the ore dressing process. Under the conditions of Mn 9.52% in the raw ore, the results were obtained as follows: manganese content in manganese concentrate is 15.56% and recovery is 85.54%, which laid the technical foundation for the efficient use of the mine.
作者
张周位
陈文祥
黄苑龄
杨国彬
Zhang Zhouwei;Chen Wenxiang;Huang Yuanling;Yang GuoBin(Guizhou Center Laboratory of Geological & Mineral Resource, Guizhou Engineering Research Center for Comprehensive Utilization of Precious Metals Mineral Resources, Guiyang, Guizhou, Chin)
出处
《矿产综合利用》
CAS
北大核心
2018年第3期66-69,共4页
Multipurpose Utilization of Mineral Resources
基金
贵州省科技计划项目(黔科合sY字[2015]3003号)
关键词
碳酸锰矿
工艺矿物学
磁选
Manganese carbonate ore
Process mineralogy
Magnetic separation