摘要
The Large Sky Area Multi-Object Fiber Spectroscopic Telescope（LAMOST） is the largest existing spectroscopic survey telescope, having 32 scientific charge-coupled-device（CCD） cameras for acquiring spectra. Stability and automation of the camera-control software are essential, but cannot be provided by the existing system. The Remote Telescope System 2 nd Version（RTS2） is an open-source and automatic observatory-control system. However, all previous RTS2 applications were developed for small telescopes. This paper focuses on implementation of an RTS2-based camera-control system for the 32 CCDs of LAMOST. A virtual camera module inherited from the RTS2 camera module is built as a device component working on the RTS2 framework. To improve the controllability and robustness, a virtualized layer is designed using the master-slave software paradigm, and the virtual camera module is mapped to the 32 real cameras of LAMOST. The new system is deployed in the actual environment and experimentally tested. Finally, multiple observations are conducted using this new RTS2-frameworkbased control system. The new camera-control system is found to satisfy the requirements for automatic camera control in LAMOST. This is the first time that RTS2 has been applied to a large telescope, and provides a referential solution for full RTS2 introduction to the LAMOST observatory control system.
The Large Sky Area Multi-Object Fiber Spectroscopic Telescope（LAMOST） is the largest existing spectroscopic survey telescope, having 32 scientific charge-coupled-device（CCD） cameras for acquiring spectra. Stability and automation of the camera-control software are essential, but cannot be provided by the existing system. The Remote Telescope System 2 nd Version（RTS2） is an open-source and automatic observatory-control system. However, all previous RTS2 applications were developed for small telescopes. This paper focuses on implementation of an RTS2-based camera-control system for the 32 CCDs of LAMOST. A virtual camera module inherited from the RTS2 camera module is built as a device component working on the RTS2 framework. To improve the controllability and robustness, a virtualized layer is designed using the master-slave software paradigm, and the virtual camera module is mapped to the 32 real cameras of LAMOST. The new system is deployed in the actual environment and experimentally tested. Finally, multiple observations are conducted using this new RTS2-frameworkbased control system. The new camera-control system is found to satisfy the requirements for automatic camera control in LAMOST. This is the first time that RTS2 has been applied to a large telescope, and provides a referential solution for full RTS2 introduction to the LAMOST observatory control system.
基金
supported by the National Key Research and Development Program of China(Grant No.2016YFE0100300)
the Joint Research Fund in Astronomy(Grant Nos.U1531132,U1631129 and U1231205)under cooperative agreement between the National Natural Science Foundation of China(NSFC)
the Chinese Academy of Sciences(CAS)
the National Natural Science Foundation of China(Grant Nos.11603044,11703044,11503042,11403009and 11463003)
