摘要
When a four in-wheel motors drive electric vehicle with a specific wheels mass is running on an uneven road and transient steering occurs in the meantime, the joint action of the large unsprung dynamic load and the centrifugal force may cause the vehicle to rollover. To avoid the above accident, a rollover prevention control method based on active distribution of the in-wheel motors driving torques is investigated. First, the rollover evolution process of the four in-wheel motors drive electric vehicle under the described operating condition is analyzed. Next, a multiple degrees of freedom vehicle dynamics model including an uneven road tyre model is established, and the rollover warning threshold is determined according to the load transfer ratio. Then, the hypothesis of the effects of unsprung mass on the vehicle roll stability on a plat road and on an uneven road is verified respectively. Finally, a rollover prevention controller is designed based on the distribution of the four wheels driving torques with sliding mode control,and the control effect is verified by simulations. The conclusion shows that, once the wheels mass does not match road conditions,the large unsprung mass may play a detrimental role on the vehicle roll stability on an uneven road, which is different from the beneficial role of large unsprung mass on the vehicle roll stability on a plat road. With the aforementioned rollover prevention controller, the vehicle rollover, which is caused by the coupling effect between large unsprung dynamic load and suspension potential energy on an uneven road, can be avoided effectively.
When a four in-wheel motors drive electric vehicle with a specific wheels mass is running on an uneven road and transient steering occurs in the meantime, the joint action of the large unsprung dynamic load and the centrifugal force may cause the vehicle to rollover. To avoid the above accident, a rollover prevention control method based on active distribution of the in-wheel motors driving torques is investigated. First, tile rollover evolution process of the four in-wheel motors drive electric vehicle under the described operating condition is analyzed. Next, a multiple degrees of freedom vehicle dynamics model including an uneven road tyre model is established, and the rollover warning threshold is determined according to the load transfer ratio. Then, the hypothesis of the effects of unsprung mass on the vehicle roll stability on a plat road and on an uneven road is verified respectively. Finally, a rollover prevention controller is designed based on the distribution of the four wheels driving torques with sliding mode control, and the control effect is verified by simulations. The conclusion shows that, once the wheels mass does not match road conditions, the large unsprung mass may play a detrimental role on the vehicle roll stability on an uneven road, which is different from the beneficial role of large unsprung mass on the vehicle roll stability on a plat road. With the aforementioned rollover prevention controller, the vehicle rollover, which is caused by the coupling effect between large unsprung dynamic load and suspension potential energy on an uneven road, can be avoided effectively.
作者
ZHANG LiPeng
LI Liang
QI BingNan
ZHANG LiPeng;LI Liang;QI BingNan(School of Vehicle and Energy, Yanshan University, Qinhuangdao 066004, China;School of Electrical Engineering, Yanshan University, Qinhuangdao 066004, China)
基金
supported by the National Natural Science Foundation of China(Grant Nos.51405259&51775478)
