摘要
Numerical simulations of electrostatic precipitators featuring wire and spiked electrode designs were performed to determine particle behavior and separation efficiency. The applied-voltage mechanism that alters the flow structure of particles through ionic winds and mean electric fields are revealed. Numeri- cal studies throughout the past years have shown these structures for channel and pipe configurations. However, less attention was given to field averaging for the ni,~r-product and electric field. Our study focuses on this averaging and illustrates relevant differences between multidimensional setups concern- ~ng these fields. Turbulence was modeled using the Reynolds-averaged Navier-Stokes equations with a second-order Reynolds-stress-model closure. A high three-dimensionality of the ionic wind-induced turbulence is presented. This leads to an increase in the submicron-particle precipitation rate. The results confirm the dependence of separation efficiency on particle density and permittivity, thereby showing the advantages of spiked wires compared with wire-plate setups used in electrostatic precipitators.
Numerical simulations of electrostatic precipitators featuring wire and spiked electrode designs were performed to determine particle behavior and separation efficiency. The applied-voltage mechanism that alters the flow structure of particles through ionic winds and mean electric fields are revealed. Numeri- cal studies throughout the past years have shown these structures for channel and pipe configurations. However, less attention was given to field averaging for the ni,~r-product and electric field. Our study focuses on this averaging and illustrates relevant differences between multidimensional setups concern- ~ng these fields. Turbulence was modeled using the Reynolds-averaged Navier-Stokes equations with a second-order Reynolds-stress-model closure. A high three-dimensionality of the ionic wind-induced turbulence is presented. This leads to an increase in the submicron-particle precipitation rate. The results confirm the dependence of separation efficiency on particle density and permittivity, thereby showing the advantages of spiked wires compared with wire-plate setups used in electrostatic precipitators.
