期刊文献+

V、Ti、Si、Zr对CoCrFeMnNi高熵合金组织与性能的影响 被引量:5

Effects of V,Ti,Si and Zr elements on microstructure and properties of CoCrFeMnNi high entropy alloy
原文传递
导出
摘要 通过制备Co Cr Fe Mn Ni X(X=V,Ti,Si,Zr)高熵合金,研究了原子尺寸差异δ与合金的组织、相结构和磨损性能之间的关系。研究结果表明:随着δ值增大,合金的XRD衍射强度逐渐降低,合金由FCC单相结构过渡到FCC+BCC双相结构;随着δ值的增大,对应合金的摩擦因数降低,硬度和磨损性能提高。当δ值大于11.40%时,合金的显微组织、相结构、硬度和磨损性能均发生显著变化,δ=11.40%为Co Cr Fe Mn Ni X高熵合金组织和性能发生突变的阈值。 The relationship between the atomic radius difference( δ) and the microstructure,phase structure and wear properties of Co Cr Fe Mn Ni X( X = V,Ti,Si,Zr) high entropy alloys were studied by preparing the alloys. The results indicate that with the increase of δvalue,the XRD diffraction intensity decreases gradually and the phase structure transforms from FCC to FCC + BCC,as well the friction coefficient decreases and the microhardness and wear properties increase. When the δ value is greater than 11. 40%,the microstructure,phase,microhardness and wear properties of the alloys change remarkably. That δ = 11. 40% is the threshold for the abrupt change of microstructure and properties of the Co Cr Fe Mn Ni X high entropy alloy.
作者 张太超 李俊魁 徐向俊 韩柯 彭竹琴 Zhang Taichao;Li Junkui;Xu Xiangjun;Han Ke;Peng Zhuqin(Department of Material and Chemical Engineering, Zhongyuan University of Technology, Zhengzhou Henan 450007, China;State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao Hebei 066004, China;School of Mechanic and Electrical Engineering, Yangtze Normal University, Chongqing 408100, China;State Key Laboratory of Advanced Welding and Joinig, Harbin Institute of Technology, Harhin Heilongjiang 150001, China)
出处 《金属热处理》 CAS CSCD 北大核心 2018年第6期28-33,共6页 Heat Treatment of Metals
基金 国家自然科学基金(U1204508) 河南省自然科学基金(U1204508)
关键词 CoCrFeMnNi高熵合金 原子尺度差异 显微组织 磨损性能 CoCrFeMnNi high entropy alloy atomic radius difference microstructure wear property
  • 相关文献

参考文献2

二级参考文献21

  • 1徐祖耀 李麟.材料热力学[M].北京:科学出版社,2000.173.
  • 2叶均蔚 陈瑞凯 刘树均.高熵合金的发展概况.工业材料杂志,2005,224:71-79.
  • 3YEH J W, CHEN S K, LIN S, GAN J Y, CHIN T S, SHUN T T, TSAU C H, CHANG S Y. Nanostmctured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes [J]. Advanced Engineering Materials, 2004, 6(5): 299-303.
  • 4CHEN H Y, TSAI C W, TUNG C C, YEH J W, SHUN T T,YANG CC, CHEN S K. Effect of substitution of Co by Mn in Al-Cr-Cu-Fe—Co—Ni high-entropy alloys [J]. Annales De Chimie-Science Des Materiaux, 2006, 31(6): 685-698.
  • 5WU J M, LIN S J,YEH J W, CHEN S K, HUANG Y S,CHEN H C. Adhesive wear behavior of Al^CoCrCuFeNi high-entropy alloys as a function of aluminum content [J]. Wear, 2006, 261(5—6): 513-519.
  • 6CHEN T K, SHUN T T, YEH J W, WONG M S. Nanostructured nitride films of multi-element high-entropy alloys by reactive DC sputtering [J]. Surface and Coatings Technology, 2004, 188—189(1—3): 193—200.
  • 7LIN Y C, CHO Y H. Elucidating the microstructural and tribological characteristics of NiCrAlCoCu and NiCrAlCoMo multicomponent alloy clad layers synthesized in situ [J]. Surface & Coatings Technology, 2009, 203(12): 1694—1701.
  • 8HUNG P K, YEH J W, SHUN T T, YEH J W. Multi-principal-element alloys with improved oxidation and wear resistance for thermal spray coating [J]. Advanced Engineering Materials, 2004, 6(1-2): 74-78.
  • 9WANG Y P, LI B S, FU H Z. Solid solution or intermetallics in a high-entropy alloy [J]. Advanced Engineering Materials, 2009, 11(8): 641-644.
  • 10LI B S, WANG Y P, REN M X,YANG C, FU H Z. Effects of Mn, Ti and V on the microstructure and properties of AlCrFeCoNiCu high entropy allow [J]. Materials Science and Engineering A, 2008, 491(1-2): 154-158.

共引文献50

同被引文献75

引证文献5

二级引证文献25

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部