中国电动自行车动力铅酸蓄电池生命周期评价
被引量:1
摘要
本研究采用了大量企业调研数据和中国本土LCA数据库,以期反映整个中国铅酸蓄电池产业链的技术工艺和环境管理水平现状。结果表明,原材料生产和电池使用是资源(含能源)消耗的主要阶段,贡献了电池全生命周期绝大部分的环境影响。
出处
《电动自行车》
2018年第6期44-50,共7页
Electric Bicycle
参考文献3
-
1吕玉桦,孔婷,让蔚清.2004-2012年我国血铅超标事件的流行特征分析[J].中国预防医学杂志,2013,14(11):868-870. 被引量:14
-
2郁亚娟,王冬,王翔,朱睿,陈妍,包丽颖,吴锋.二次电池生命周期评价软件模块的设计与应用[J].工业安全与环保,2012,38(6):13-16. 被引量:5
-
3潘军青,边亚茹.铅酸蓄电池回收铅技术的发展现状[J].北京化工大学学报(自然科学版),2014,41(3):1-14. 被引量:35
二级参考文献53
-
1杨凡,杨惠,毛萌,杨速飞,江咏梅,柳晓琴.成都地区0~8岁儿童血铅水平及相关危险因素分析[J].中国儿童保健杂志,2007,15(1):83-84. 被引量:15
-
2陈维平.一种湿法回收废铅蓄电池填料的新技术[J].湖南大学学报(自然科学版),1996,23(6):111-116. 被引量:32
-
3张建芳.铅污染与儿童健康[J].中国食物与营养,2007,13(8):55-57. 被引量:8
-
4黄带弟,夏定国.生命周期评价方法在氧化钴生产中的应用[J].环境科学与技术,2007,30(7):56-58. 被引量:2
-
5Mathijs Bouman, Reinout Heijungs, Ester van der Voet, et al. Material flows and economic models:An analytical comparison of SFA, LCA and partial equilibrium models [ J]. Ecological Eco- nomics, 2000, 32(2) : 195 - 216.
-
6Chunshan Song. Fuel processing for low- temperature and high - temperature fuel cells: Challenges, and opportunities for sus- tainable development in the 21st eentury[ J]. Catalysis Today, 2002, 77(1-2):17-49.
-
7Martin Pehnt. Life - cycle assessment of fuel cell stacks[ J]. In- ternational Journal of Hydrogen Energy, 2001, 26 ( 1 ) : 91 - 101.
-
8Denise Crocce Romano Espinosa, Andr6a Moura Bemardes, Jorge Alberto Soares Ten6rio. Brazilian policy on battery disposal and its practical effects on battery recycling[ J]. Journal of Pow- er Sources, 2004, 137(1) :134- 139.
-
9A Daryabeigi Zand, M A Abduli. Current situation of used household batteries in Iran and appropriate management poli- cies[J~. Waste Management, 2008, 28( 11 ) :2085 - 2090.
-
10Mark Goop, Renilde Spriensma. The Eco- indicator99: A damage oriented method for life cycle impact assessment. Methodology Report [ R ]. The Netherlands: Preconsultants, 1999.
共引文献49
-
1黄侣义.踝关节骨折66例手术治疗分析[J].广西医科大学学报,2000,17(2):320-321.
-
2雍波,田阳,杨斌,徐宝强,刘大春,熊能,张伟.碳酸铅真空热分解的实验研究[J].昆明理工大学学报(自然科学版),2018,43(6):12-19. 被引量:1
-
3谭庆平,刘诚,黄志石,邱训军.深圳电子行业焊锡作业铅污染的调查分析[J].实用预防医学,2014,21(7):834-835. 被引量:3
-
4马雪,王洪涛.生命周期评价在国内的研究与应用进展分析[J].化学工程与装备,2015(2):164-166. 被引量:14
-
5王学健,沈海泉.废铅酸蓄电池回收技术现状及发展趋势[J].科技创新与应用,2015,5(9):4-6. 被引量:11
-
6代少振,蔡晓祥,吴鑫,王江林,项晨,马永泉,刘孝伟.废铅酸蓄电池回收技术现状[J].世界有色金属,2015,40(9):15-17. 被引量:5
-
7吕玉桦,旷满华,剪耀文,高露,让蔚清.中国儿童铅中毒防控策略研究[J].中国公共卫生管理,2015,31(5):606-609. 被引量:4
-
8麦剑平,舒友梅,郭冠浩,刘移民.广州市蓄电池行业重金属职业病危害因素检测与分析[J].中国职业医学,2015,42(5):592-594. 被引量:2
-
9姚贝.论污染型环境犯罪的因果关系[J].中国刑事法杂志,2015(5):72-89. 被引量:10
-
10詹光,黄草明.废铅酸蓄电池铅膏回收利用技术的现状与发展[J].有色矿冶,2016,32(1):48-52. 被引量:12
同被引文献6
-
1王晓.可变间距式履带底盘测功机驱动轴组合有限元分析[J].农机化研究,2012,34(8):204-207. 被引量:3
-
2乔晋崴,尚建忠,陈循,罗自荣.基于凸轮自锁原理的伸缩式管道机器人设计[J].机械工程学报,2010,46(11):83-88. 被引量:15
-
3王维,贺功民,田智辉,徐国宁.变间距挤压式核桃破壳机的研制[J].中国农机化学报,2014,35(6):174-176. 被引量:18
-
4李晓星.河道清理机器人收集机构的动力学建模与仿真[J].机械设计与制造,2018(1):239-241. 被引量:2
-
5张雷,徐海军,徐小军,潘存云.双作用环面凸轮接触特性研究[J].机械设计与制造,2018(A01):67-70. 被引量:1
-
6张文强,李召召,谭豫之,李伟.变间距梳刷式枸杞采收装置优化设计与试验[J].农业机械学报,2018,49(8):83-90. 被引量:19
-
1党传青.吕超:从“薄脸皮”到“销售高手”[J].中国有色金属,2018,0(9):38-38.
-
2刘诚,陈宋璇,吕东,孙铭阳,陈学刚.废旧动力电池回收关键技术探讨[J].中国有色冶金,2018,47(2):44-48. 被引量:14
-
3D.N.Wilson,张弓.铅[J].中国有色冶金,1988,0(12):15-19.
-
4骆占斌,陈浮,张旺园,冯启言,张绍良,马静.再生铅厂土壤重金属污染及健康风险评价[J].环境科学与技术,2018,41(4):197-204. 被引量:9
-
5杨彩霞,杨珺婷,张志伟.2018年5月铅市回顾及展望[J].中国铅锌,2018,0(6):9-15.
-
6金凯平.一个自觉全面整顿的企业[J].工业技术经济,1984(3):37-40.