期刊文献+

船用带缆桩选型方法探讨 被引量:1

On Selection Method for Bollard in Ships
下载PDF
导出
摘要 针对国际船级社协会(IACS)对带缆桩的最新要求,同时考虑了UR A2(2016)要求,综合考虑经济性,提出结合"缆绳缠绕方式"和"缆绳设计载荷"的带缆桩选型方法及带缆桩强度校核方法。 To meet the newest requirements of IACS for bollard,the rope winding mode and its design loads were considered comprehensively to set forth one kind of method for choosing the nominal size of bollard. The strength of bollard was assessed according to requirements of UR A2(2016).
作者 金林武 JIN Lin-wu(Nantong COSCO KHI Ship Engineering Co.Ltd.,Nantong Jiangsu 226005,Chin)
出处 《船海工程》 北大核心 2018年第3期36-39,45,共5页 Ship & Ocean Engineering
关键词 带缆桩 动力学 设计载荷 选型 经济性 bollard dynamics design load selection economy
  • 相关文献

参考文献5

二级参考文献11

  • 1Amendments to the Annex I of MARPOL 73/79, Regulation 12A- Oil fuel tank protection[S].
  • 2Germanischer Lloyd. Calculation Sheet of DE 48/WP.2 and Excel Sheet explanatory notes to MARPOL Annex I,Reg.12A[S].
  • 3Lloyd's Register. Calculation Sheet to MARPOL Annex I, Reg.12A[S].
  • 4Napa Ltd. NAPA manuals 2009[CP].
  • 5Napa Ltd. MAPOL MANAGER in NAPADB of NAPA[CP].
  • 6IMO MEPC 53 Report, Annex 25 Proposed Amendments to the Revised Marpol Annex I ( Addition of New Regulation 13A on Oil Fuel Tank Protection ) [R]. 25 July 2005, London
  • 7IMO Resolution MEPC. 122 (52), Explanatory Notes on Matters Related to the Accidental Oil Outflow Performance Under Regulation 23 of the Revised Marpol Annex I [S]. Adopted on 15 October 2004, London
  • 8IMO MEPC 54/WP. 8, Consideration and Adoption of Amendments to Mandatory Instruments [ S ]. 22 March 2006, London
  • 9IMO.International Convention for the Prevention ofPollution from Ships[].(MARPOL /).2011
  • 10.Amendments to regulation 1,addition toregulation 12A,consequential amendments to the IOPPCertificate and amendments to regulation 21 of the revisedAnnex I of MARPOL 73/78[].MEPC.2006

共引文献7

同被引文献3

引证文献1

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部