期刊文献+

中国南海Spar平台悬链线立管的涡激振动研究

Study of Vortex-Induced Vibration of SCRs for a Spar Platform with the Application in South China Sea
下载PDF
导出
摘要 立柱式平台(Spar平台)是一款适合深水及超深水应用的新型浮式平台,适于中国南海油气资源钻探、开发及生产。钢悬链线立管(SCR)因其结构简单、经济可靠,得到了广泛的应用。SCR的涡激振动(VIV)疲劳损伤关系到SCR及整个平台生产的安全。结合中国南海的环境条件,研究了用于Spar平台的SCR的涡激振动。主要介绍了立管的布置和形态,给出了18英寸(1英寸≈2.54cm)立管的VIV疲劳分析结果,并对关键参数进行了敏感性分析,为工程化立管设计提供了很好的参考依据。 Spar platform is a new type of floating platform for deep and ultra-deep water applications.It is suitable for the exploration,development and production of oil and gas in the South China Sea.Steel catenary risers(SCRs)are widely used allover the world due to its structure simplicity,high reliability and economy.SCR's fatigue damage caused by vortex-induced vibration(VIV)is vital to the safety of SCRs and the entire platform.We consider the environmental conditions in the South China Sea and study the VIV of SCRs for a Spar platform.The layout and configuration of SCRs are introduced at first.Then the VIV fatigue of 18-inch SCR is analyzed.Furthermore,the sensitivity of key parameters is investigated.This research will provide a good reference for deepwater riser design.
作者 陈刚 程永明 徐爱进 王钰涵 CHEN Gang;CHENG Yong-ming;XU Ai-jin;WANG Yu-han(Shanghai Waigaoqiao Shipbuilding Co. , Ltd. , Shanghai 200137, China;Richtech International Engineering, Shanghai 200233, China)
出处 《海洋工程装备与技术》 2018年第3期181-185,共5页 Ocean Engineering Equipment and Technology
关键词 立柱式平台 深吃水 钢悬链线立管 涡激振动 Spar platform deep draft steel catenary riser (SCR) vortex-induced vibration (VIV)
  • 相关文献

参考文献2

二级参考文献35

  • 1石山,冉志煌,漆春茂.海洋工程深水开发浮式系统的耦合计算方法[J].中国造船,2005,46(4):47-51. 被引量:12
  • 2黄维平,李华军.深水开发的新型立管系统——钢悬链线立管(SCR)[J].中国海洋大学学报(自然科学版),2006,36(5):775-780. 被引量:59
  • 3Martins C A,Higashi E.A parametric analysis of steel catenary risers:Fatigue behavior near the top[C].// Proceedings of the International Offshore and Polar Engineering Conference.USA:ISOPE,2000,2:54-59.
  • 4Anthi Miliou,Spencer J Sherwin,J Michael R Graham.Fluid dynamic loading on curved riser pipes[J].Journal of Offshore Mechanics and Arctic Engineering,2003,125(3):176-182.
  • 5Roderick Y Edwards,Jr Remo Zauli,Machado Filho,et al.Load monitoring at the touch down point of the first Steel Catenary riser installed in a deepwater moored semi-submersible platform[C].// Proceedings-Offshore Technology Conference.USA:OTC,1999,2:295-303.
  • 6Ricardo Franciss,Elton Ribeiro.Analyses of a large diameter steel lazy wave riser for ultra deepwater in Campos Basin[C].// Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering.Canada:ASME,2004,1:355-361.
  • 7Kjell Morisbak Lund,Petter Jensen,Daniel Karunakaran,et al.A steel catenary riser concept for Statfjord C[C].// Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering.Portugal:ASME,1998:98-1361.
  • 8Nygard M K,Sele A,Lund K M.Design of a 25.5-in titanium catenary riser for the Asgard B platform[C].// Proceedings-Offshore Technology Conference.USA:OTC,2000,3:343-354.
  • 9Gautam Chaudhury,Jonathan Kennefick.Design,testing and installation of steel catenary risers[C].// Proceedings-Offshore Technology Conference.USA:OTC,1999,2(2):339-346.
  • 10Gore C T,El Paso,Basim B Mekha.Common sense requirements (CSRs) for steel catenary risers (SCRs)[C].// Proceedings Offshore Technology Conference.USA:OTC,2002:14153.

共引文献80

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部