摘要
为验证轴类大锻件多工步开坯工艺参数的合理性,使用有限元软件FORGE对其开坯变形过程进行数值模拟,并与实际生产结果进行了对比。结果表明,有限元模拟得到的轴类大锻件多工步开坯温度场、锻件形状、展宽与实际生产吻合良好,可为正确制定开坯工艺提供依据。
In order to verify the rationality of the heavy axial forging multi-pass cogging parameters,the finite element software FORGE was used to simulate the forging,and the results was compared with the actual production.The results show that the simulation of forging shape,temperature field,stretching and production can be in good agreement with the actual production,which provides a basis for the cogging process correctly.
作者
刘嵩
马洪儒
刘助柏
张建
LIU Song;MA Hongru;LIU Zhubai;ZHANG Jian(School of Mechanical Engineering,Anyang Institute of Technology,Anyang 455000,China;School of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China;Technical Center,Zhongyuan Special Steel Ltd.Co.,Jiyuan 459008,China)
出处
《铸造技术》
CAS
2018年第7期1537-1540,共4页
Foundry Technology
关键词
大锻件
多工步数值模拟
开坯
heavy axial forging
multi-pass numerical simulation
cogging