摘要
本文基于耦合求解的思想,轴向、径向均采用特征线法(MOC),通过开展2D/1D耦合MOC理论模型、模块化几何预处理方法研究,开发了2D/1D耦合MOC 3D中子输运求解程序MMOC,并开展了1D/2D/3DC5G7基准题验证。k_(eff)的相对误差分别为0.082%、0.045%、0.032%,该程序准确有效,计算精度满足中子输运计算的要求。
Based on the idea of coupling solution,the method of characteristic line（MOC）is applied in both axial and radial directions.By carrying out the 2D/1 Dcoupling MOC theory and modular geometry preprocessing method,a 2D/1 Dcoupling neutron transportation code MMOC was developed,and the 1D/2D/3D C5G7 benchmark was verified.The relative errors of k_（eff） are 0.082%,0.045%,and 0.032%.The MMOC code is reliable and can satisfy the computational requirement of neutron transportation.
作者
刘紫静
李雪辉
谢金森
于涛
陈珍平
赵鹏程
谢芹
何丽华
LIU Zijing1,2,3,LI Xuehui1,3,XIE Jinsen1,2,YU Tao1,2,CHEN Zhenping1,2,ZHAO Pengcheng1,2,XIE Qin1,2,HE Lihua 1,2(1. School of Nuclear Science and Technology, University of South China, Hengyang 421001, China , 2. Nuclear Power and Technology Engineering Virtual Simulation Experiment and Teaching Center, Hengyang 421001, China , 3. China Institute of Atomic Energy, Beijing 102413, Chin)
出处
《原子能科学技术》
EI
CAS
CSCD
北大核心
2018年第6期979-986,共8页
Atomic Energy Science and Technology
基金
国家自然科学基金资助项目(11575079)
湖南省教育厅资助项目(16C1365)
核反应堆系统设计技术重点实验室基金资助项目
关键词
特征线法
几何预处理
3D中子输运
MMOC程序
method of characteristic line
geometry prepossessing
3D neutron transportion
MMOC code
