期刊文献+

铁素体不锈钢晶粒度的非线性超声表征 被引量:3

Nonlinear Ultrasonic Characterization of Grain Size of Ferritic Stainless Steel
下载PDF
导出
摘要 利用非线性超声检测技术,测量了不同晶粒尺寸铁素体不锈钢的非线性参数,并与传统线性超声技术的评估结果进行了比较。结果表明,随着铁素体不锈钢晶粒尺寸的增大,声速变化并不明显,相对变化量为1.89%,衰减系数的相对变化量也只有5.65%,而非线性参数随晶粒尺寸的增加而持续减小,这是由于声波在材料内的传播过程中,其非线性效应很大一部分产生在晶界等不连续处,随着晶粒尺寸的增大,晶界面积减小,非线性效应减弱。 The nonlinear parameters of ferritic stainless steels with different grain sizes were measured by nonlinear ultrasonic testing technique,and the results were compared with that of the traditional ultrasonic technology.The results show that with the increase of the grain size of ferrite stainless steel,the variation of sound velocity is not obvious,its relative change is only 1.89% and the relative change of attenuation coefficient is 5.65%.The nonlinear parameters whereas decrease continuously with the increase of the grain size,which is due to a large part of the nonlinear effect being generated in the grain boundary when the acoustic waves propagate in the material.With the increase of grain size,the grain boundary area is reduced,so the nonlinear effect is weakened.
作者 陈军 刘国彩 林莉 罗忠兵 CHEN Jun;LIU Guocai;LIN Li;LUO Zhongbing(School of Materials Science and Engineering,Dalian University of Technology,Dalian 116024,China)
出处 《无损检测》 2018年第7期15-18,81,共5页 Nondestructive Testing
关键词 铁素体不锈钢 晶粒度 非线性参数 表征 ferritic stainless steel grain size nonlinear coefficient characterization
  • 相关文献

参考文献3

二级参考文献29

  • 1蒋佳 刘伟 Andrew Godfrey 刘庆.AZ31镁合金孪生行为的EBSD研究[J].中国体视学与图像分析,2005,10(4):237-240. 被引量:10
  • 2王晓瑾.超细晶粒硬质合金的研究与应用[J].江西冶金,2006,26(1):37-40. 被引量:14
  • 3Jiang J, Godfrey A, Liu W, Liu Q. Identification and analysis of twinning variants during compression of a Mg-Al- Zn alloy[J]. Scripta Materialia, 2008, 58: 122- 125.
  • 4Jiang J, Godfrey A, Liu W, Liu Q. Microtexture evolution via deformation twinning and slip during compression of AZ31[J]. Materials Science and Engineering A,2008, 483 - 484 : 576 - 579.
  • 5Yang P, Yu Y, Chen L, Mao W. Experimental determination and theoretical prediction of twin orientations in magnesium alloy AZ31 [ J]. Scripta Materialia, 2004, 50:1163 - 1168.
  • 6Huang X, Hansen N. Grain orientation effect on microstructure in tensile strained copper [ J ]. Scripta Materialia, 1998, 38: 1697- 1703.
  • 7杨平 孙祖庆 毛卫民.取向成像:一种有效研究晶体材料组织、结构及取向的技术[J].中国体视学与图像分析,2001,6:50-54.
  • 8LEHTO P, REMES H, SAUKKONEN T, et al. Influence of grain size distribution on the Hall-Petch relationship of welded structural steel[J]. Materials Science and Engineering: A, 2014, 592: 28-39.
  • 9GALVIS E A R, HORMAZA W. Characterization of failure modes for different welding processes of AISI/SAE 304 stainless steels[J]. Engineering Failure Analysis, 2011, 18(7): 1791-1799.
  • 10VOORT G F V. Measuring the grain size of specimens with non-equiaxed grains[J]. Practical Metallography, 2013, 50(4): 239-251.

共引文献34

同被引文献19

引证文献3

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部