期刊文献+

1000MW锅炉添加炉膛贴壁风系统后屏过超温分析 被引量:1

下载PDF
导出
摘要 用于防止发电厂炉膛水冷壁发生高温腐蚀而加装炉膛贴壁风系统,由于对二次风造成分流作用,使得侧墙氧量增加,大大破坏原先的内部流场分布,在减少侧墙水冷壁发生高温腐蚀的同时,造成屏过、高过管壁温度极易发生超温状况。由于炉膛贴壁风的介入,同时针对各产地的差异煤种,锅炉各配风风量,总煤粉量、总风量等锅炉参数必须做出相应的改变调整才能保证燃煤的快速着火和燃尽。 to prevent power plant furnace water wall high temperature corrosion and equipped with a stove or furnace wall wind system, due to the secondary air distribution function, increase oxygen side wails, greatly damage the original internal flow field distribution, side to reduce high temperature corrosion of water wall occurred at the same time, due to screen, above overtemperature tube wall temperature easily happened. Because of the furnace wall wind intervention, at the same time, in view of the different types of the origin, boiler air distribution air volume, total amount of pulverized coal, total air volume must make the corresponding adjustment to change the boiler parameters, such as to ensure fast ignition and burning of coal.
作者 蔡小敏
出处 《科技视界》 2018年第12期33-34,共2页 Science & Technology Vision
关键词 贴壁风 高温腐蚀 超温 控制措施 Wall sticking wind High temperature corrosion Overtemperature Control measures
  • 相关文献

参考文献3

二级参考文献32

  • 1柳宏刚,张广才,王志刚,廖晓春,陈敏生,陈宜阳.墙式对冲燃烧锅炉高温腐蚀原因分析与治理[J].热力发电,2013,42(12):129-131. 被引量:15
  • 2唐正义.1Cr25Ni20Si2耐热不锈钢管的试制[J].冶钢科技,1994(1):29-32. 被引量:1
  • 3吴华淼,钱垂喜,罗德勇,郑民牛,陆达年,陶瑞灿.1000t/h直流炉水冷壁烟侧高温腐蚀的分析和预防[J].华东电力,1995,23(6):32-35. 被引量:6
  • 4王春昌,魏奉群.切圆燃烧锅炉水冷壁高温腐蚀和结渣部位研究[J].热力发电,2007,36(3):29-31. 被引量:19
  • 5李争起,陈智超,孙锐.防止水冷壁高温腐蚀和结渣的燃烧器墙式布置的锅炉装置[P]中国专利:CN1657825.
  • 6JAN TALER.A method of determining local heat flux in boiler furnaces. Journal of Energy Heat and Mass Transfer . 1992
  • 7Bryers R W. Fireside slagging, fouling, and high-temperature corrosion of heat-transfer surface due to impurities in steam-raising fuels[J]. Progress in Energy and Combustion Science,1996,22(1):29-120.
  • 8Launder B E, Spalding D B. The numerical computation of turbulent flows [J]. Computer Methods in Applied Mechanics and Engineering,1974,3(2):269-289.
  • 9Zhou Hao, Yang Yu, Liu Haize, et al. Numerical simulation of the combustion characteristics of a low NOxx swirl burner: influence of the primary air pipe [J]. Fuel,2014,130:168-176.
  • 10Ettouati H, Boutoub A, Benticha H, et al. Numerical modelling and simulation of pulverized solid-fuel combustion in swirl burners [J]. The Canadian Journal of Chemical Engineering,2009,87(3):350-358.

共引文献45

同被引文献5

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部