摘要
研究了抗坏血酸对硫酸盐体系电镀Ni–Fe合金镀液稳定性的影响,镀液(pH=4.2)组成为:NiSO_4·6H_2O 300 g/L,NiCl_2·6H_2O40 g/L,FeSO_4·7H_2O 0.75 g/L,H_3BO_3 30 g/L,十二烷基磺酸钠8 mg/L,抗坏血酸0.00~0.15 g/L。结果表明,抗坏血酸可抑制镀液中Fe^(2+)的氧化。当抗坏血酸质量浓度为0.10 g/L时,镀液的稳定性最好,镀层的耐蚀性得到提高。
The effect of ascorbic acid on stability of sulfate Ni–Fe alloy electroplating bath was studied. The bath composition is: NiSO4·6H2O 300 g/L, NiCl2·6H2O 40 g/L, Fe SO4·7H2O 0.75 g/L, H3BO3 30 g/L, sodium dodecyl sulfonate 8 mg/L, and ascorbic acid 0.00-0.15 g/L. It is shown that ascorbic acid has an inhibition effect on the oxidation of Fe^2+. The bath containing ascorbic acid 0.10 g/L has the best stability, and produces coatings with improved corrosion resistance.
作者
邢乐红
黎德育
李宁
左明辉
李晶
XING Le-hong;LI De-yu;LI Ning;ZUO Ming-hui;LI Jing(School of Chemistry and Chemical Engineering,Mudanjiang Normal University,Mudanjiang 157012,China)
出处
《电镀与涂饰》
CAS
CSCD
北大核心
2018年第12期526-528,共3页
Electroplating & Finishing
基金
黑龙江省高校青年创新人才培养计划项目(UNPYSCT-2016108)
牡丹江师范学院青年学术骨干项目(GG2018001)
牡丹江师范学院教学改革研究项目(17-XJH19002)
黑龙江省教育厅高等教育教学改革研究项目(SJGY20170156)
关键词
镍–铁合金
电镀
硫酸盐
抗坏血酸
亚铁离子
稳定性
耐蚀性
nickel–iron alloy
electroplating
sulfate
ascorbic acid
ferrous ion
stability
corrosion resistance