摘要
针对目前故障电弧发生装置不能很好地模拟环境温湿度、触头分离状态的问题,研制了一种串联型故障电弧模拟实验装置。该装置可通过控制环境温湿度、触头移动距离或振动的频率和幅值等分离状态,模拟在不同工况下产生的串联型故障电弧,并对环境温湿度、电弧电压、电弧电流进行实时显示和存储。实验结果验证了该装置的有效性。
In view of problem that current fault arc generator device could not simulate temperature and humidity of environment and contact separation state,a series fault arc simulation experimental device was developed.The device can simulate series fault arc under different working conditions by controlling temperature and humidity of environment,contact separation state such as movement distance and frequency and amplitude of vibration,and real-timely display and store temperature and humidity of environment,arc voltage and arc current.The experimental results verify effectiveness of the device.
作者
郭凤仪
阮俊义
邓勇
王智勇
王少磊
李川
王培龙
GUO Fengyi;RUAN Junyi;DENG Yong;WANG Zhiyong;WANG Shaolei;LI Chuan(Faculty of Electrical and Control Engineering,Liaoning WANG Peilong Technical University,Huludao 125105,China)
出处
《工矿自动化》
北大核心
2018年第7期66-70,共5页
Journal Of Mine Automation
基金
国家自然科学基金资助项目(51277090)
关键词
串联型故障电弧
电弧模拟
温湿度
触头分离
series fault arc
arc simulation
temperature and humidity
contact separation