期刊文献+

Microstructure and mechanical properties of Nb–Mo–ZrB_2 composites prepared by hot-pressing sintering 被引量:2

Microstructure and mechanical properties of Nb–Mo–ZrB_2 composites prepared by hot-pressing sintering
下载PDF
导出
摘要 Nb-Mo-ZrB2 composites (V(Nb)/V(Mo) = 1) with 15v01% or 30v01% of ZrB2 were fabricated by hot-pressing sintering at 2000~C The phases, microstxucture, and mechamcal properties were then investigated. The composites contain Nb-Mo solid solution (denoted as (Nb, Mo)ss hereafter), ZrB, MoB, and NbB phases. Compressive strength test results suggest that the strength of Nb-Mo-ZrB2 composites increases with increasing ZrB2 content; Nb-Mo-30vol%ZrB2 had the highest compressive strength (1905.1 MPa). The improvement in the compressive strength of the Nb-Mo-ZrB2 composites is mainly attributed to the secondary phase strengthening oftke stiffer ZrB phase, sol- id-solution strengthening oftke (Nb, Mo)ss matrix as well as fme-grain strengtkening. The fracture toughness decreases with increasing ZrB2 content. Finally, the fracture modes oftke Nb-Mo-ZrB2 composites axe also discussed in detail. Nb-Mo-ZrB2 composites (V(Nb)/V(Mo) = 1) with 15v01% or 30v01% of ZrB2 were fabricated by hot-pressing sintering at 2000~C The phases, microstxucture, and mechamcal properties were then investigated. The composites contain Nb-Mo solid solution (denoted as (Nb, Mo)ss hereafter), ZrB, MoB, and NbB phases. Compressive strength test results suggest that the strength of Nb-Mo-ZrB2 composites increases with increasing ZrB2 content; Nb-Mo-30vol%ZrB2 had the highest compressive strength (1905.1 MPa). The improvement in the compressive strength of the Nb-Mo-ZrB2 composites is mainly attributed to the secondary phase strengthening oftke stiffer ZrB phase, sol- id-solution strengthening oftke (Nb, Mo)ss matrix as well as fme-grain strengtkening. The fracture toughness decreases with increasing ZrB2 content. Finally, the fracture modes oftke Nb-Mo-ZrB2 composites axe also discussed in detail.
作者 yuan gao zong-de liu qi wang yong-tian wang Yuan Gao;Zong-de Liu;Qi Wang;Yong-tian(Wang Key Laboratory of Condition Monitoring and Control for Power Plant Equipment of Ministry of Education,North China Electric Power University,Beijing 102206,China)
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2018年第7期824-831,共8页 矿物冶金与材料学报(英文版)
基金 financially supported by the National Natural Science Foundation of China(No.11372110)
关键词 metal-matrix composites microstJ-ucture mechaNcal properties SINTERING metal-matrix composites microstJ-ucture mechaNcal properties sintering
  • 相关文献

参考文献5

二级参考文献57

  • 1Bewlay B P, Jackson M R, Zhao J C, et al. A review of very-high-temperature Nb-silicide-based composites. Metallurgical and Materials Transactions A 2003; 34(10): 2043-2052.
  • 2Zhao J C, Westbrook J H. Ultrahigh-temperature materials for jet engines. MRS Bulletin 2003; 28(9): 622-630.
  • 3Bewlay B E Jackson M R, Zhao J C, et al. Ultrahigh-temperature Nb-silicide-based composites. MRS Bulletin 2003; 28(9): 646-653.
  • 4Balsone S J, Bewlay B P, Jackson M R, et al. Materials beyond superalloys-exploiting high-temperature composites. Proceedings of the International Symposium on Structural Intermetallics. United States: Minerals, Metals and Materials Society (TMS), 2001.
  • 5Fernandes P B, Coelhoa G C, Ferreira F, et al. Thermodynamic modeling of the Nb-Si system, lntermetallics 2002; 10(10): 993-999.
  • 6Fernandez G A. Gibbs energy coupling of phase stability and thermochemistry in the Hf-Nb system. Journal of Alloys and Compounds 1996
  • 7Yang Y, Chang Y A, Zhao J C, et al. Thermodynamic modeling of the Nb-Hf-Si ternary system. Intermetallics 2003; 11 (5): 407-415.
  • 8Zhao J C, Bewlay B P, Jackson M R. Determination of Nb-Hf-Si phase equilibria. Intermetallics 2001 ; 9(8): 681-689.
  • 9Liang H, Chang Y A. Thermodynamic modeling of the Nb-Si-Ti ternary system. Intermetallics 1999; 7(5): 561-570.
  • 10Zhao J C, Jackson M R, Peluso L A. Mapping of the Nb-Ti-Si phase diagram using diffusion multiples. Materials Science and Engineering A 2004; 372(1-2): 21-27.

共引文献8

同被引文献15

引证文献2

二级引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部