摘要
拉挤制品性能通常以弯曲强度与剪切强度来表征。通过设计不同玻纤含量、不同纤维直径及不同填料比例的拉挤成型实验,分析了拉挤过程中玻纤含量、纤维直径和填料量三类主要影响因素对拉挤制品性能的影响,并给出了一些改进措施与建议。
The mechanical properties of pultruded profiles are usually characterized by flexural strength and shear strength. This paper analyzes the effects of 3 main factors （ glass fiber content, fiber diameter and filler content ） on the mechanical properties of pultruded profiles by citing the results of pultrusion experiments using different glass fiber content, fiber diameter and filler content, based on which some measures and suggestions are provided.
作者
张志坚
钟洪强
宋长久
费其锋
周贤旺
李焕兴
Zhang Zhijian;Zhong Hongqiamg;Song Changjiu;Fei Qifeng;Zhou Xianwang;Li Zhenxing(Jushi Fiberglass Research Institute,Zhejiang Province Key Laboratory for Glass Fiber Research,Jushi Group Co.Ltd.,Tongxiang 314500)
出处
《玻璃纤维》
CAS
2018年第3期16-19,共4页
Fiber Glass
关键词
玻纤及填料
拉挤成型
弯曲强度
剪切强度
玻纤含量
纤维直径
填料量
glass fiber and filler
pultmsion flexural strength
shear strength
glass fiber content
fiber diameter
filler content
