摘要
In this paper, a high refractive index metamaterial (HRM), whose element is composed of bilayer square patch (BSP) spaced by a dielectric plate, is proposed. By reducing the thickness of the dielectric plate and the gap between adjacent patches, the BSP can effectively enhance capacitive coupling and simultaneously suppress diamagnetic response, which significantly increases the refractive index of the proposed metamaterial. Furthermore, the high refractive index region is far away from the resonant region of the metamaterial, resulting in broadband. Based on these characteristics of BSP, a gradient refractive index (GRIN) lens with thin thickness (0.34/~0, where 2~0 is the wavelength at 5.75 GHz) is designed. By using this lens, we then design a circularly polarized horn antenna with high performance. The measurement results show that the 3-dB axial ratio bandwidth is 34.8% (4.75 GHz-6.75 GHz) and the antenna gain in this frequency range is increased by an average value of 3.4 dB. The proposed method opens up a new avenue to design high-performance antenna.
In this paper, a high refractive index metamaterial (HRM), whose element is composed of bilayer square patch (BSP) spaced by a dielectric plate, is proposed. By reducing the thickness of the dielectric plate and the gap between adjacent patches, the BSP can effectively enhance capacitive coupling and simultaneously suppress diamagnetic response, which significantly increases the refractive index of the proposed metamaterial. Furthermore, the high refractive index region is far away from the resonant region of the metamaterial, resulting in broadband. Based on these characteristics of BSP, a gradient refractive index (GRIN) lens with thin thickness (0.34/~0, where 2~0 is the wavelength at 5.75 GHz) is designed. By using this lens, we then design a circularly polarized horn antenna with high performance. The measurement results show that the 3-dB axial ratio bandwidth is 34.8% (4.75 GHz-6.75 GHz) and the antenna gain in this frequency range is increased by an average value of 3.4 dB. The proposed method opens up a new avenue to design high-performance antenna.
作者
Lai-Jun Wang
Qiao-Hong Chen
Fa-Long Yu
Xi Gao
王来军;陈巧红;余发龙;高喜(School of Information and Communication,Guilin University of Electronic Technology,Guilin 541004,China;Guangxi Key Laboratory of Wireless Wideband Communication&Signal Processing,Juilm 541004,L'hma)
基金
Project supported by the National Natural Science Foundation of China(Grant Nos.61761010 and 61461016)
in part by the Natural Science Foundation of Guangxi Zhuang Autonomous Region,China(Grant No.2015jj BB7002)
in part by the Guangxi Key Laboratory of Wireless Wideband Communication and Signal Processing
in part by the Innovation Project of GUET Graduate Education(Grant No.2018JCX24)