期刊文献+

火工品大量值振动试验技术研究及案例分析 被引量:1

Study and Case Analysis of High Value Vibration Test Technology for Initiators
下载PDF
导出
摘要 为解决现有振动台无法满足火工品大量值振动试验的需求,设计一种基于谐振原理的火工品振动放大试验装置。在振动台输出较小激振力的情况下,在该装置上依靠谐振放大来满足试验需求,并针对具体的案例进行试验验证和分析。结果表明:设计的振动放大试验装置能够有效满足试验需求,振动量值、偏差符合标准要求,可应用在火工品大量值振动考核试验中。 In order to meet the demand of high value vibration test for the initiators, a vibration amplification device based on the principle of resonance was designed, which can meet the test requirements in the case of small output exciting force. Meanwhile, test verification and analysis for specific case was carried out, the results showed that the designed test device is effective, the deviation value of vibration meet the standard requirement, and the device can be used in the high value vibration test for initiators.
作者 张鹏辉 王琦 王维娜 张涛 刘卫东 ZHANG Peng-hui, WANG Qi, WANG Wei-na ,ZHANG Tao, LIU Wei-dong(Shaanxi Applied Physics and Chemistry Research Institute, Xi’an, 71006)
出处 《火工品》 CAS CSCD 北大核心 2018年第3期47-49,共3页 Initiators & Pyrotechnics
关键词 火工品 振动试验 谐振放大 偏差 Initiators and pyrotechnics Vibration test Resonant amplification Deviation
  • 相关文献

参考文献1

二级参考文献11

  • 1张磊,刘永光,付永领,何琳.基于自适应陷波器的主动隔振仿真研究[J].系统仿真学报,2005,17(1):234-237. 被引量:9
  • 2杨辉,范永坤,舒怀亮.抑制机械谐振的一种改进的数字滤波器[J].光电工程,2004,31(B12):30-32. 被引量:10
  • 3HUNG J Y. Control of industrial robots that have transmission elasticity[J]. IEEE Transactions on Industrial Electronics, 1991, 38(6) : 421 -427.
  • 4COLOMBI S, RAIMOND1 T. Compliance compensation in mechatronic systems [ C ]//IEEE 20th International Conference on Industrial Electronics, Control and Instrumentation, September 5-9, 1994, Bologna, Italy. 1994,41:946-951.
  • 5OHMAE T, MATSUDA T, KANNO M, et al. A microprocessorbased motor speed regulator using fast-response state observer for reduction of torsional vibrations[ J]. IEEE Transactions on Industry Applications, 1987, IA-23(5) : 863 -871.
  • 6SUGIURA K, HORI Y. Vibration suppression in 2-and 3-mass system based on the feedback of imperfect derivative of the estimated torsional torque[ J]. IEEE Transactions on Industrial Electronics, 1996, 43(1) : 56 -64.
  • 7VITTEK J, BRIS P, MAKYS P, et al. Control of flexible drive with PMSM employing forced dynamics [ C ]//2008 13tb International Power Electronics and Motion Control Conference, September 1-3, 2008, Poznan, Poland. 2008:2219-2226.
  • 8OHISHI K. Robust position servo system based on vibration suppression control for industrial robotics [ C ]//The 2010 International Power Electronics Conference, June 21 -24, 2010, Sapporo, Japan. 2010:2230-2237.
  • 9VUKOSAVIC S N, STOJIC M R. Suppression of torsional oscillations in a high-performance speed servo drive[ J ]. IEEE Transactions on Industrial Electronics, 1998, 45 (1) : 108 -117.
  • 10FERREIRA J A, DORLAND P, FREDDIE G B. An active inline notch fiher for reducing acoustic noise in drives[ J]. IEEE Transactions on Industrial Electronics, 2007, 43 (3) : 798-804.

共引文献57

同被引文献4

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部