期刊文献+

一种超宽带低噪声放大器的仿真设计 被引量:1

Simulation Design of Ultra-Wideband Low-Noise Amplifier
下载PDF
导出
摘要 低噪声放大器是接收机感知、筛选信号的关键部件。它的工作带宽、噪声系数、增益及增益平坦度等关键指标,将直接决定整个系统的性能。得益于半导体技术的发展,微波器件的综合性能迅速提高,跨频段的高性能通用低噪声放大器的设计得以实现。结合负反馈电路结构的优点,利用Advanced Design system仿真软件,设计了一种可工作于0.2~2 GHz的放大器。它的噪声系数小于1.5 dB,增益大于30 dB,增益平坦度小于±1 dB。 Low-noise amplifier is the key device to the receiver in its perceiving and screening the signal. Its main performance indicators,such as working bandwidth, noise figure, gain and gain-flatness,would directly determine the performance of the whole system. Thanks to the development of semiconductor technology and rapid improvement on the comprehensive performance of the design of high-performance universal low-noise amplifier across the frequency band is realized. Combined with the advantages of the negative feedback circuit structure and by using the simulation software called Advanced Design System, the amplifier working at 0.2 GHz ~ 2 GHz is designed, which could provide less than 1.5 dB noise figure, more than 30 dB gain and less than ±1 dB gain-flatness.
作者 吴治霖 WU Zhi-lin(No.30 Institute of CETC,Chengdu Sichuan 610041,China)
出处 《通信技术》 2018年第6期1481-1486,共6页 Communications Technology
关键词 低噪声放大器 超宽带 负反馈 增益平坦度 ADS low-noise amplifier uhra-wideband negative feedback
  • 相关文献

参考文献1

二级参考文献4

  • 1莫特钦巴切尔CD 菲特钦FC.低噪声电子设计[M].北京:国防工业出版社,1977..
  • 2陈邦缓.射频通信电路[M].北京:科学出版社,2002.97-117.
  • 3文德林G D,李永和.用S参数法设计放大器和振荡器[M].北京:科学出版社,1986.41-133.
  • 4Matthew M Radmanesh. CHAPTER 15 RF/Microwave Amplifiers 1: Small- Signal Design (Radio Frequency and Microwave Electronics illustrated) [M]. 北京: 电子工业出版社 ,2002.493 - 530.

共引文献6

同被引文献4

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部