期刊文献+

行星轮并联均布齿轮传动系统的回差分析 被引量:1

Backlash Analysis of Gear Transmission of Parallel Uniform Planetary Gear
下载PDF
导出
摘要 为减小行星传动系统回差,提高其传动精度,在NGW行星齿轮传动系统的基础上,提出一种行星轮并联均布齿轮传动系统。综合考虑齿轮偏心误差和工作载荷对行星传动系统回差的影响,得到传动系统的回差数学公式,分析了载荷及齿轮偏心误差对传动系统回差的影响。研究结果表明,随着工作载荷增大,行星轮并联均布齿轮传动系统与NGW行星齿轮传动系统的回差均增大,且较为接近,但NGW行星齿轮传动系统回差增幅略大;相同齿轮偏心误差条件下,行星轮并联均布齿轮传动系统回差小于NGW行星齿轮传动系统回差;行星轮并联均布齿轮传动系统中,太阳轮偏心误差对于传动系统回差影响较大,外齿圈偏心误差影响较小,行星轮偏心误差的影响介于二者之间。 Based on the NGW planetary gear transmission system,a gear transmission of parallel uniform planetary gear is proposed to reduce the transmission error of asteroid transmission system and improve its transmission accuracy. The backlash formula is obtained by considering the influence of gear eccentricity error and working load on the backlash of planetary transmission system. The influence of load and gear eccentricity error on the transmission system is analyzed. The results show that,as the working load increasing,the backlash of gear transmission of parallel Uniform Planetary gear and NGW planetary gear transmission system are all increased. But the backlash of NGW planetary gear transmission system is slightly larger. Under the condition of same gear eccentricity error,the backlash of gear transmission of parallel uniform planetary gear is less than the backlash of NGW planetary gear transmission system. In the gear transmission of parallel uniform planetary gear,the eccentricity error of the solar wheel has a great impact on the transmission system,but the eccentricity error of the outer ring has less influence on the transmission system. The influence of planetary wheel eccentricity error on the transmission system is between sun wheel and planet gear.
作者 郭靖 朱增宝 刘春 张标 Guo Jing;Zhu Zengbao;Liu Chun;Zhang Biao(School of Mechanical Engineering,Anhui University of Science And Technology,Huainan 232001,China)
出处 《机械传动》 CSCD 北大核心 2018年第7期124-127,共4页 Journal of Mechanical Transmission
基金 安徽省教育厅自然科学研究重点(KJ2013A093) 安徽省高等教育重大教学改革研究(2015zdjy071)
关键词 行星传动 并联均布 回差 Planetary transmission Parallel uniform distribution Backlash
  • 相关文献

参考文献6

二级参考文献35

  • 1李聚波,贺红霞,张洛平,杨晓蔚,李剑锋.齿轮传动精度的分析与计算[J].煤矿机械,2006,27(7):18-20. 被引量:13
  • 2楠波 成电合译.精密齿轮机构装置-理论与实践[M].北京:国防工业出版社,1978..
  • 3朱才朝,博士学位论文,1998年
  • 4朱才朝,重庆大学学报,1997年,20卷,2期,89页
  • 5Shu Xiaolong,Mech Mach Theory,1995年,30卷,2期,313页
  • 6现代机械设计手册编委会,现代机械设计手册,1995年,102页
  • 7LiST.Effectsofmachiningerrorsandtoothmodificationonloadingcapacity,loadsharingratioandtransmissiononerrorofapairofspurgears[J].MechanismandMachineTheory,2007,42(6):698726.
  • 8NagahataD,HendricxW,AnthonisJ,etal.Reducinggearwhineofavaltracontinousvariabletransmission[C]∥ProceedingsoftheVDIBerichteConferenceonAgriculturalEngineering.Hannover:VDIMEG,2009:113122.
  • 9GeorgeW.Michalec.Precisiongearing:theoryandpractice[M].NewYork:JohnWiley&Sons,1966.
  • 10吴慈生.齿轮偏心误差所引起的传动误差[J].南京工学院学报,1982,25(4):133145.

共引文献60

同被引文献14

引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部