摘要
普通无线监测系统中单个数据节点完整性较低,不能在适应网络多级结构分布形式变化的前提下,完成数据传输情况的实时记录;为解决上述问题,设计新型分布式网络多通道实时数据无线监测系统;通过数据实时采集、JIAG无线监测电路设计,确定网络服务器在分布式串口中的连接形式,完成新型监测系统的硬件设计;针对监测电路模块,对多通道网络协议、节点监测主程序、无线监测上机位三大环节进行调整,完成新型监测系统的软件设计,实现系统的顺利运行;对比实验结果表明,与传统系统相比,应用新型无线监测系统后,多级网络结构分布适应性提升35%左右、单个数据节点的完整性提升20%左右。
The integrity of the single data node in the ordinary wireless monitoring system is low,and the real-time record of the data transmission can not be completed on the premise of adapting to the change of the multilevel structure of the network.To solve these problems,a new distributed network multi-channel real-time data wireless monitoring system is designed.Through the real-time data acquisition and JIAG wireless monitoring circuit design,the connection form of the network server in the distributed serial port is determined,and the hardware design of the new monitoring system is completed.According to the monitoring circuit module,the three links of the multi-channel network protocol,the node monitoring main program and the wireless monitoring machine are adjusted to complete the new type.The software of the monitoring system is designed to achieve the smooth operation of the system.The experimental results show that,compared with the traditional system,the adaptability of the multilevel network structure is up to about 35% and the integrity of the single data node is up to 20% after the new wireless monitoring system.
作者
钱军
Qian j un(Jiangxi Information Center, Nanchang 330036, Chin)
出处
《计算机测量与控制》
2018年第9期53-57,82,共6页
Computer Measurement &Control
关键词
分布式网络
实时数据
无线监测
数据采集
JIAG电路
串口服务器
网络协议
监测上机位
distributed network
real time data
wireless monitoring
data acquisition
JIAG circuit
serial port server
network protocol
monitoring upper location