摘要
本文探讨了酚醛树脂与国产YT822芳纶纸的匹配性,分析了树脂浓度和浸胶工艺对国产YT822芳纶纸浸润的影响规律。研究结果表明,当树脂胶液比重为0.96~0.97时,浸润性最好,上胶量最多;当浸胶工艺参数平置时间为45~60s、树脂胶液比重为0.96~0.97、流淌时间为65~85s时,蜂窝密度均匀性会有显著的提高。
The matching of phenolic resin and domestic YT822 aramid paper was discussed,the influence law was analysed through the infiltrations of resin concentration and impregnation process on the YT822 aramid paper.The results show when the specific gravity of resin solution is 0. 96 ~ 0. 97,the infiltration was the best.,and the resin amount was the more,when the average placement time of impregnation process was 25 s ~ 60 s,the specific gravity of resin solution was 0. 96 ~ 0. 97,and the flow density was 65 s ~ 100 s,the density of honeycomb was improved obviously.
作者
郑付来
ZHENG Fulai(Beijing Institute of Aeronautical Materials,Beijing 100095 China)
出处
《高科技纤维与应用》
CAS
2018年第4期44-49,37,共7页
Hi-Tech Fiber and Application
关键词
芳纶纸蜂窝
酚醛树脂
浸胶
匹配性
aramid paper honeycomb
phenolic resin
impregnation
match