摘要
海上升压站吊装、运输和安装作业是一项高风险的工程,每一步的决策都非常重要。实时振动监测不但可得到大量有价值的监测数据而且可对驳船所运输的升压站组块的各项指标实时监控,还能对随时可能发生的安全隐患进行提早预警,从而降低风险减小损失。文章以江苏滨海北H2海上升压站项目为例,对实时振动监测系统的设计思路进行了阐述,并对监测结果进行了分析。希望通过文章的设计思路及数据分析结果,为类似的海上升压站项目提供参考。
The hoisting,transportation and installation of offshore substations is a high risk pro ject,and every decision is very important. In order to reduce risk and losses, real time vibration monitoring is necessary that it cannot only get a lot of valuable monitoring data but also real time monitor the various indexes of the substation transported by barge and provide early warning of potential safety hazard. Taking BHN H2 offshore station project as an example, this paper expound the design method of real time vibration monitoring system ,and analyzed the monitoring results.It was hoped that through the design method and data analysis results of this paper, refer ence for similar offshore substation projects would be provided.
作者
张田雷
崔志伟
王永强
ZHANG Tianlei;CUI Zhiwei;WANG Yongqiang(Tianjin Research Institute for Water Transport Engineering,M.O.T.,Tianjin 300156,China;China Tianjin Survey and Design Institute for Water Transport Engineering,Tianjin 300156,China)
出处
《海洋开发与管理》
2018年第9期115-119,共5页
Ocean Development and Management
基金
中央级公益性科研院所基本科研业务费专项资金项目(TKS170212)
关键词
海上升压站
海上运输
振动监测
无线MESH网络
经验模态分解
Offshore substation
Marine transportation
Vibration monitoring
Wireless Mesh net work
Empirical mode decomposition