摘要
现代孔加工要求越来越高,孔电解加工因其独特的优势引起了广泛的关注。为提高孔的电解加工质量,需全面了解当前的孔电解加工水平。从电解加工电极、运动控制、电源和电解液优化及其循环等方面对国内外孔电解加工的研究现状及其相关技术进行了系统总结,可知采用脉冲电流、改变阴极形状、改进电极进给方式等都能有效提高孔的电解加工质量。最后指出了孔的电解加工技术的研究趋势。
The requirement of the modern holes machining is getting higher. Electrochemical machining of holes has attracted wide attention for its unique advantages. In order to improve the electrochemical machining of holes, it is necessary to fully understand the current level of electrochemical machining of holes. From the aspects of electrolytic processing electrode and motion control, it summarizes power supply and electrolyte optimization and circulation, etc, the research status and related technologies of hole electrolysis processing at home and abroad, concludes that the quality of ECM can be effectively improved by using pulse current, changing the shape of cathode and improving the feed mode of electrode, points out the trend of hole electrochemical machining technology.
作者
尹飞鸿
杨炼
何亚峰
蒋丽伟
吴小锋
Yin Feihong;Yang Lian;He Yafeng;Jiang Liwei;Wu Xiaofeng(School of Mechanical and Vehicular Engineering,Changzhou Institute of Technology,Jiangsu Changzhou,213032,China）（2.School of Mechanical Engineering,Changzhou University,Jiangsu Changzhou,213164,China）（3.Key Laboratory of Special Processing of Jiangsu Province,Jiangsu Changzhou,213032,China)
出处
《机械设计与制造工程》
2018年第9期1-4,共4页
Machine Design and Manufacturing Engineering
基金
江苏省"333工程"科研资助计划项目(BRA2015080)
江苏省研究生实践创新计算项目(SJCX17_0731)
关键词
电解加工
孔加工
新工艺
新技术
electrochemical machining
hole processing
new process
new technology
