期刊文献+

低渗透油藏微乳液驱启动压力梯度研究 被引量:11

Start-Up Pressure Gradient Research of Microemulsion Applied on Low Permeability Reservoir
下载PDF
导出
摘要 利用微流量计量仪,通过"压差-流量"法,精确测定了低渗透油藏水驱和微乳液驱的启动压力梯度,深入分析了低渗透油藏非线性渗流特征,重点研究了微乳液对低渗透油藏启动压力梯度的影响和作用机理。结果表明,低渗透油藏的"压差-流量"曲线是一条上凹型曲线,具有非达西渗流特征。启动压力梯度与渗透率呈乘幂关系,启动压力梯度随渗透率的减小而增大,水驱平均启动压力梯度为0.050 MPa/m,微乳液驱平均启动压力梯度为0.039 MPa/m。微乳液之所以会有效降低启动压力梯度,是因为它能够显著降低界面张力,减小了边界层的渗流阻力。微乳液界面张力越低,启动压力梯度也就越小。 Using the method of "pessure consumption" and Micro flow measurement instrument the start up pressure gradient of water flooding and microemulsion flooding in low permeability reservoir is actually measured. Analyzed the characteristics of nonlinear seepage and the effect with mechanization of start up pressure gradient of microemulsion in low permeability reservoir. The result show that the pessure consumption curve of low permeability reservoir is a concave up curve which has non Darcy seepage flow characteristic. The start up pressure gradient and permeability in a power, and start up pressure gradient are increasing with the reduction of permeability.The average start up pressure gradient of flooding water is 0.050 MPa/m, and the average start up pressure gradient of micro emulsion flooding is 0.039 MPa/m.The reason why microemulsion can reduce start up pressure gradient is that it can decrease interracial tension and resistance coefficient. The lower the interracial tension of micro emulsion, the small start up pressure gradient.
作者 殷代印 贾江芬 康红庆 Yin Daiyin;Jia Jiangfen;Kang Hongqing(College of Petroleum Engineering,Northeast Ptroleume University,Daqing Heilongjiang 163318,China;Daqing Oil Field Co.,Daqing Heilongjiang 163318,China)
出处 《石油化工高等学校学报》 CAS 2018年第5期38-44,共7页 Journal of Petrochemical Universities
基金 国家自然科学基金资助项目(51474071)
关键词 低渗透 微乳液 启动压力梯度 非线性渗流 界面张力 Low permeability reservoir Microemulsion Start up pressure gradient Non linear seepage Interracial tension
  • 相关文献

参考文献10

二级参考文献122

共引文献387

同被引文献161

引证文献11

二级引证文献32

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部