摘要
针对导弹测发控系统实时性、可靠性和安全性的实际需求,提出一种面向导弹测发控系统的Missile-CAN通信协议。详细定义报文的29位标识符和数据通信模式,制定CAN网络的管理机制。在通信的安全性上采用AES加密算法对传输报文进行加密。介绍实验系统硬件平台,并设计软件实现方法。仿真实验结果表明:网络的通信质量良好,总线利用率符合导弹测发控系统实时性要求,验证了Missile-CAN协议的可行性。
Aiming at the real time, reliability and security of test and launch control system for missile, a Missile-CAN communication protocol for missile test and launch control system is proposed. The 29 bit identifier and data communication mode of the message are defined in detail, and the management mechanism of the CAN network is formulated. In the security of communication, AES encryption algorithm is used to encrypt transmission messages. The hardware platform of the experiment system is introduced and the method of software realization is designed. The simulation experiment results show that the communication quality of the network is good and the utilization rate of the bus conforms to the real-time requirement of test and launch control system for missile, and the feasibility of the Missile-CAN protocol is verified.?
作者
陈基昕
王忠
赵锦宇
Chen Jixin;Wang Zhong;Zhao Jinyu?(Basic Department,Rocket Force University of Engineering,Xi'an 710025,China)
出处
《兵工自动化》
2018年第10期17-23,共7页
Ordnance Industry Automation
关键词
导弹测发控系统
CAN总线
通信协议
test and launch control system for missile
CAN bus
communication protocol