期刊文献+

Electrochemical property of LiFePO4/C composite cathode with different carbon sources 被引量:4

Electrochemical property of LiFePO_4/C composite cathode with different carbon sources
原文传递
导出
摘要 To improve the performance of battery cathode materials that consist of carbonaceous organic material, carbon coatings on lithium iron phosphate (LiFePO4/C) materials were synthesized by different carbon sources. LiFePO4/C was synthesized by a combination method of sol-gel and gas-phase diffused permeation. LiFeO4/C materials were prepared by coating different carbon con- tents. High-performance composite materials were pre- pared by combining carbon with element doped by two modified methods. The elements of Fe and C came from Fe3+ and sucrose, glucose, citric acid. Thermogravimetry- differential thermal analysis (TG-DTA), X-ray diffrac- tometer (XRD), scanning electron microscope (SEM), cycle voltammetry (CV), and charge-discharge test were used to characterize and test the surface morphology, structure, and electrochemical performance. The results show that LiFePO4/C synthesized with sucrose has higher specific discharge capacity than the other materials. The specific discharge capacity of this material is 84.27 mAh.g-1. The capacity retention could attain 94 % of the initial discharge capacity after 30 cycles, showing good electrochemical performance. To improve the performance of battery cathode materials that consist of carbonaceous organic material, carbon coatings on lithium iron phosphate (LiFePO4/C) materials were synthesized by different carbon sources. LiFePO4/C was synthesized by a combination method of sol-gel and gas-phase diffused permeation. LiFeO4/C materials were prepared by coating different carbon con- tents. High-performance composite materials were pre- pared by combining carbon with element doped by two modified methods. The elements of Fe and C came from Fe3+ and sucrose, glucose, citric acid. Thermogravimetry- differential thermal analysis (TG-DTA), X-ray diffrac- tometer (XRD), scanning electron microscope (SEM), cycle voltammetry (CV), and charge-discharge test were used to characterize and test the surface morphology, structure, and electrochemical performance. The results show that LiFePO4/C synthesized with sucrose has higher specific discharge capacity than the other materials. The specific discharge capacity of this material is 84.27 mAh.g-1. The capacity retention could attain 94 % of the initial discharge capacity after 30 cycles, showing good electrochemical performance.
出处 《Rare Metals》 SCIE EI CAS CSCD 2018年第9期743-749,共7页 稀有金属(英文版)
基金 financially supported by the National Natural Science Foundation of China (No.51274143)
关键词 SOLGEL Gas-phase diffused permeation LIFEPO4/C SUCROSE Citric acid Solgel Gas-phase diffused permeation LiFePO4/C Sucrose Citric acid
  • 相关文献

同被引文献27

引证文献4

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部