摘要
通过JSCAST软件对2 m七叶螺旋桨铸造的充型和凝固过程进行了数值模拟,分析模拟结果,预测了铸件质量。对铸造工艺进行了优化和改进,避免了关键部位出现铸造缺陷,提高了产品性能。
The filling and solidification process of 2 m seven-blade propeller casting was numerically simulated by JSCAST software. The simulation results were analyzed, the casting quality was predicted, and the casting process was optimized and improved. The results show that the casting defects are avoided and the performance of the products are improved.
作者
刘瑜
赵枢明
薛铠华
姜元军
孙长宏
姚山
LIU Yu1, ZHAO Shuming1, XUE Kaihua1, JIANG Yuanjun2, SUN Changhong2, YAO Shan1(1. School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China; 2. Dalian Marine Propeller Co., Ltd., Dalian 116021, China)
出处
《铸造技术》
CAS
2018年第10期2223-2226,2230,共5页
Foundry Technology
基金
国家高技术研究发展计划(863计划)(SS2015AA042502)
关键词
船用螺旋桨
铸造工艺
砂型铸造
数值模拟
marine propeller
casting process
sand casting
numerical simulation
