摘要
灵宝金源公司黄金冶炼厂制酸尾气中含有二氧化硫、氮氧化物和颗粒物等污染物,其破坏环境,不利于矿业的可持续发展。采用氢氧化钠吸收法处理制酸尾气的成本高,且处理后尾气不符合DB 41/1066—2015 《工业炉窑大气污染物排放标准》要求;采用过氧化氢同步脱硫脱硝-电除雾法处理制酸尾气,并进行了工业应用。实践结果表明,处理后的尾气中二氧化硫浓度69. 10 mg/m3、氮氧化物浓度160. 87 mg/m3、颗粒物浓度28. 59 mg/m3,远优于国家标准和河南省地方标准要求。该工艺的成功应用,为黄金冶炼尾气处理工艺选择提供了技术支撑。
Pollutants including sulphur dioxide, nitrogen oxide and particulate matters exist in the tail gas from acid-making process in the gold smeltery of Lingbao Jinyuan Company, damaging environment and hindering sustain- able development of mining sector. It takes high costs to treat the tail gas from acid-making process with sodium hydioxide absorpotion and the treatment effect doesn't conform to the requirement of DB 41/1066 -2015 Industrial Kiln Air Pollutant Emission Standards; synchronic desulfurization and denitrification -electromigration with sodium hydroxide is employed to treat the tail gas from acid-making process and industrial application is conducted. Practice shows that the sulphur dioxide concentration in the treated gas is 69.10 mg/m^3 ,nitrogen oxide concentration is 160.87 mg/m^3, particulate matter concentration is 28.59 mg/m^3 , far better than national and Henan regional standards. The successful application of the process provides technical support for the selection of gold smehing tail gas treatment processes.
作者
李建政
刘晓勃
Li Jianzheng;Liu Xiaobo(Lingbao Jinyuan Mining Co.,Ltd)
出处
《黄金》
CAS
2018年第11期67-69,共3页
Gold
关键词
制酸尾气
氢氧化钠吸收法
过氧化氢
脱硫脱硝
电除雾
tail gas from acid-making process
sodium hydroxide absoq3tion
hydrogen peroxide
desulfurization and denitrification
electromigration