摘要
设计了一款由5片塑料非球面透镜组成的1 300万像素大孔径手机镜头。将曲面传感器引入镜头设计,在不增加镜片数量以及保证大光圈的基础上改善了边缘像质,解决了边缘失光问题。系统采用1/3英寸(4.8mm×3.6mm),长宽比为4∶3的曲面传感器。该镜头的焦距为3.5mm,F数为1.55,视场角为74°,全视场调制传递函数(MTF)均大于0.4,最大畸变小于3.5%,相对照度大于55%,可以获得良好的成像效果。镜头公差灵敏度较低,能满足加工条件。
A 13megapixel largeaperture mobile phone lens consisting of 5 plastic aspherical lenses was designed. Through introducing the curved sensor into the design of lens, the edge image quality could be improved without increasing the number of lenses while the large aperture was ensured,and the problem of edge loss could be solved . The system uses a 1/3 inch (4.8 mm×3.6 mm) curved surface sensor with a 4∶3 aspect ratio. The lens has a focal length of 3.5 mm, an Fnumber of 1.55, an angle of view of 74°, a full field modulation transfer function (MTF) of greater than 0.4, a maximum distortion of less than 3.5%, and a relative illumination of greater than 55% ,which can achieve good imaging effect. The tolerance is specified at a large value to meet the requirements of production.
作者
王思聪
王起飞
陈晓西
张俊瑞
高山
叶茂
Wang Sicong;Wang Qifei;Chen Xiaoxi;Zhang Junrui;Gao Shan;Ye Mao(School of Optoelectronic Science and Engineering,University of Electronic Science and Technology of China,Chengdu 610054,China;Micro LCL Technology Co.,Ltd.,Chengdu 610000,China;BOE Technology Group Co.,Ltd.Chengdu 611731,China)
出处
《应用光学》
CAS
CSCD
北大核心
2018年第6期902-907,共6页
Journal of Applied Optics
基金
四川省科技计划(2017JY0022)
中央高校基本科研业务费(ZYGX2016J076
ZYGX2010J063)