基于单片机的电梯控制系统开发与实现

Development and implementation of elevator control system based on single chip microcomputer

基于单片机的电梯控制系统利用丰富的接口可以实现电梯轿厢上下行、开关门、语音播报、数字显示等功能。单片机采用ATC89C52RC芯片处理器去,该处理器在实现时需要配置两个,一个完成电梯主控功能,一个完成辅助控制功能,提高了电梯控制系统开发灵活性。电梯控制系统作为一个嵌入式软件,包括硬件功能和软件功能,软件主要为了提高人们操作硬件的便捷性和友好性,提高嵌入式系统的应用响应速度,因此系统开发与实现重点描述电梯控制系统的核心功能,分别是单片机电路设计、CPLD、CAN总线等三个方面,以便为电梯控制系统开发提供参考。

The elevator control system based on single-chip microcomputer can realize the functions of elevator car up and down, switch door, voice broadcast, digital display and so on by using abundant interfaces. MCU uses ATC89C52RC chip processor to go, the processor needs to be configured in the realization of two, one to complete the main control function of the elevator, one to complete the auxiliary control function, improve the development flexibility of the elevator control system. Elevator control system as an embedded software, including hardware functions and software functions, software mainly in order to improve the convenience and friendliness of people operating hardware, improve the application response speed of embedded system, so the system development and implementation of the elevator control system focuses on describing the core functions of the single- chip microcomputer circuit, respectively Design, CPLD, CAN bus and so on three aspects, in order to provide reference for the development of elevator control system.