期刊文献+

N-环己基-2-苯并噻唑次磺酰胺对废旧胶粉脱硫程度的影响 被引量:1

Effect of N-cyclohexyl-2-benzothiazolesulfenamide on desulfurization degree of waste rubber powder
下载PDF
导出
摘要 以促进剂N-环己基-2-苯并噻唑次磺酰胺(CZ)为再生剂,通过热机械剪切脱硫法制备了脱硫再生胶(DRR),考察了CZ用量对DRR性能的影响,并通过傅里叶变换红外光谱研究了废旧胶粉的脱硫反应机理。结果表明,废旧胶粉通过热机械剪切可实现有效的脱硫,促进剂CZ的加入可促进脱硫反应,提高脱硫程度;随着促进剂CZ用量的增加,DRR的数均分子量与重均分子量都先大幅度减小后又增大,分子量分布逐渐变宽,再加工性能提高,拉伸性能先提高后降低,当CZ质量分数为2%时,DRR的综合性能达到最佳。 The desorption reclaimed rubber (DRR) was prepared by thermo-mechanical shear desulfurization with accelerator N-cyclohexyl-2- benzothiazole sulfenamide (CZ) as regenerant. The effects of CZ amount on performance of DRR were investigated. The desulfurization reaction mechanism of waste rubber powder was studied by Fourier transform infrared spectroscopy. The results showed that the waste rubber powder could be effectively desulpburized through thermo-mechanical shearing. The addition of accelerator CZ could promote the desulfurization reaction and improve the desulfurization degree. With the increase of the amount of accelerator CZ wei the number average molecular weight and t average molecular weight of DRR significantly decreased firstly and then increased, the molecular weight distribution gradually increased, the reprocessability increased, and the tensile properties increased firstly and then decreased. When mass fraction of CZ was 2% , overall performance of DRR was best.
作者 耿浩然 夏艳平 周翰林 陶国良 GENG Hao-ran, XIA Yan-ping, ZHOU Han-lin, TAO Guo-liang(School of Materials Science and Engineering, Changzhou University, Changzhou 213164, China)
出处 《合成橡胶工业》 CAS CSCD 北大核心 2018年第6期437-440,共4页 China Synthetic Rubber Industry
关键词 废旧胶粉 N-环己基-2-苯并噻唑次磺酰胺 热机械剪切 脱硫 再加工性能 拉伸性能 waste rubber powder N-cyclohexyl- 2-benzothiazole sulfonamide thermo-mechanical shear desulfurization reprocessability tensile property
  • 相关文献

参考文献3

二级参考文献13

  • 1翟俊学,张萍,赵树高.硫化橡胶微波脱硫机理的再讨论[J].特种橡胶制品,2004,25(6):35-40. 被引量:32
  • 2张新星,卢灿辉,梁梅.废旧轮胎橡胶的常温应力诱导固相力化学脱硫化研究[J].高分子材料科学与工程,2006,22(6):118-121. 被引量:30
  • 3Robert A. Romine,Margaret F. Romine.Rubbercycle: a bioprocess for surface modification of waste tyre rubber[J].Polymer Degradation and Stability.1998(1)
  • 4Izumoto R, Ohshima N. Reclaimed rubber and process for reclai- ming vulcanized rubber: US, 6335377 B 1 [ P ]. 2002 - 01 - 01.
  • 5Fukumori L, Matsushita M, Okamoto H, ct al. Recycling technology of tire rubber [ J ]. JSAE Review, 2002, 23 (2) : 259 - 264.
  • 6Kojima M, Ogawa K. Devulcanization of sulfur-cured isoprene rubber in supercritical carbon dioxide[ J]. Rubber Chemistry and Technology, 2003, 76(4): 957-968.
  • 7Jsayev A, Chen J, Tukachinsky. A novel ultrasonic technology for devulcanization of waste rubber[ J]. Rubber Chemistry and Technology, 1995, 68(2): 267 -280.
  • 8Achinsky, Sehworm D, Isayev A. Devulcanization of waste rubber by powerful ultrasound [ J ]. Rubber Chemistry and Technology, 1996, 69( 1 ) : 92 - 100.
  • 9Straube G, Straube E, Neumann W. Method for reprocessing scrap rubber: US, 5275948 [ P]. 1994 - 01 - 04.
  • 10De D, Maiti S, Adhikari B. Reclaiming of rubber by a renew- able resource material (RRM) ( Ⅱ ) : Comparative evaluation of reclaiming process of NR vulcanizate by RRM and diallyld- isulfide[J]. Journal of Applied Polymer Science, 1999, 73 (14) : 2951 -2958.

共引文献9

同被引文献9

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部