摘要
主要介绍虚拟仿真技术在现实生活中的应用以及unity3D和3Dmax这两种软件,基于六个完整开发的实验,对其建模、编程调控这两个大方向进行论述。实验的最终目的是虚拟实验室的开发,通过计算机进行人机交互实验,以数字电路中的组合逻辑电路为基础,采用C#的开发语言实现开关、电路连线以及实验效果的输出,使人们仅仅通过电脑操控就可以以第一视角体验实验室逼真的环境,并得到准确的实验结果。
This paper addresses the application of virtual simulation technology in real life as well as the use and effectiveness of unity3D and 3Dmax software, based on six completely developing experiments, were discussed on the two aspects of the modeling, and programming and control. The final objective of the experiments is the development of virtual laboratory and the realization of the output of switch, circuit connection and the experimental results by use of C# development language through the human-computer interaction experiments and digital circuits combinational logic circuit as the foundation. Thus people in person can experience the real environment of the laboratory and accurate display of the experimental results just by the manipulation of computer.
作者
王开宇
周晓丹
姜艳红
崔承毅
张晶
李安琪
WANG Kai-yu;ZHOU Xiao-dan;JIANG Yan-hong;CUI Cheng-yi;ZHANGJing;LI An-qi(Electrical and Electronic National Experimental Teaching Demonstration Center;Faculty of Electronic Information and Electrical Engineering,Dalian University of Technology,Dalian 116024,China)
出处
《实验室科学》
2018年第5期93-96,共4页
Laboratory Science
基金
中央高校基本科研业务费专项资金资助(项目编号:DUT16QY32)
辽宁省自然基金资助(项目编号:201602166)