无钢圈模杯文胸塑形效果影响因素研究

Influent Factors Study of Shaping Effect of Steel Ring Free Molded Bra

介绍无铜圈模杯文胸匹位厚度与下扒中心角度的选择以及文胸塑形效果的评价指标和方法，塑形指标包括乳点间距、乳房横径、乳点高、胸厚、乳房深度和乳房表面弧长。制备下扒中心角度分别为0°、11°、23°、31°时4种版型的文胸，以及杯罩匹位厚度分别为3、8、15、22mm的4款文胸，分析文胸下扒中心角度和匹位厚度对无钢圈模杯文胸塑形效果的影响。结果表明．无钢圈模杯文胸的下扒中心角度和匹住厚度对文胸的塑形效果均有显著影响。匹位厚度为3～22mm时,匹位厚度越大,文胸的聚拢效果越明显；下扒中心角度为00～310时，下扒中心角度越大，文胸的聚拢效果和上托效果越明显；乳点间距、乳点高和乳房深度是体现文胸塑形效果变化最显著的指标。

This paper introduces the selection of adjustment angle of center and thickness of cup and the evaluation indicators and methods of the shaping effect of the bra. The shaping indicators are set to the distance of two nipples, bust inner side diameter, breast point height, chest depth, breast depth and arc length of breast surface. 4 types of bras with adjustment angles of center of 0°, 11°, 23° and 31° and 4 kinds of bras with thicknesses of 3, 8, 15 and 22 mm are prepared. It analyzes the adjustment angle of center and the thickness of cup on shaping effects of steel ring free molded bra. The results show that both of the adjustment angle of center and the thickness of cup have impacts on shaping effect. When the thickness of cup is 3-22 mm, the thicker the thickness of cup is, the better the shaping effect of horizontal fastening is. When the adjustment angle of center is 0°-31°, the bigger the adjustment angle of center is, the better the shaping effect of horizontal and vertical fastening is. The distance of two nipples, breast point height and breast depth are the most significant indicators of characterizing the shaping effect among the 6 indicators.