摘要
常规热连轧作为最常用的钢材生产方式,其主要使用板坯连续加热进行铸钢。同时在钢坯轧制前要除去表面的氧化铁皮,粗轧后再利用计算机控制技术进行精轧,最后使用无旋水流来完成热轧板带的冷却活动。通过分析常规热连轧线的Ti-IF钢铁素体轧制工艺,提出利用Ti-IF钢铁素体轧制进行组织强度与加工控制的方案。
Conventional hot strip rolling is the most commonly used method of steel production.It mainly uses slab continuous heating to cast steel.At the same time,before the billet rolling,it is to remove the surface of the oxide scale.After rough rolling,then it is to use computer control technology for fine rolling,and finally the use of non-rotating water flow is to complete the hot-rolled strip cooling activities.In this paper,the rolling process of Ti-IF steel and ferritic rolling in the conventional hot rolling line is analyzed,and the scheme of using Ti-IF steel ferrite rolling to control the strength and the rolling process is proposed.
出处
《长春工程学院学报(自然科学版)》
2018年第1期40-43,共4页
Journal of Changchun Institute of Technology:Natural Sciences Edition
基金
国家自然科学基金(51701144)
安徽省自然科学基金(1508085QE106)
铜陵学院人才科研启动基金(2016tlxyrc05)
关键词
常规热连轧线
TI-IF钢
铁素体轧制
工艺
conventional hot rolling line
Ti-IF steel
ferritic rolling
technology