期刊文献+

油田某管道管材耐蚀性分析评价 被引量:2

Analysis on Corrosion Resistance of the Pipe Material in an Oil Field
下载PDF
导出
摘要 为了评价油田某管道在其输送介质中的耐腐蚀性,采用动静态浸泡、管道冲刷等模拟试验手段,利用显微形貌观察、腐蚀失重速率、电化学表征等测试手段相结合的方法,研究了该管道管材在其输送介质中的腐蚀行为。结果表明:由于输送介质中腐蚀离子成分和管道运行工况的共同作用,管材在Cl-溶液中的腐蚀较严重,在SO42-、CO32-和HCO3-溶液中腐蚀轻微;并且随着Cl-浓度和介质流速增加,腐蚀程度均加剧。因此该管道管材与其输送介质不匹配,管道在运行过程中会发生腐蚀,应采取相应的内防护措施,以延长管道使用寿命。 In order to evaluate the corrosion resistance of an oil field pipe material in its conveying medium,the corrosion behaviors of the pipe material in its conveying medium conditions were studied by means of immersion and electrochemistry analysis.Results showed that under the combined action of the corrosion ion composition and the pipeline operation condition in the conveying medium,the degree of corrosion of pipe material was serious in Cl-solution,while was slight in SO42-,CO32-and HCO3-solutions.With the increase of Cl-concentrations and medium velocities,the corrosion degree increased.The pipe material did not match its conveying medium,and the pipeline would be corroded during operation condition.Therefore,the corresponding internal protective measures should be taken to prolong the service life of the pipeline.
作者 孙芳萍 成杰 罗慧娟 孙银娟 SUN Fang-ping;CHENG Jie;LUO Hui-juan;SUN Yin-juan(Xi’an Changqing Technology Engineering Co.,Ltd.,Xi’an 710018,China)
出处 《材料保护》 CAS CSCD 北大核心 2019年第6期161-167,共7页 Materials Protection
关键词 管材 耐蚀性 输送介质 腐蚀失重 电化学 离子浓度 pipe material corrosion resistance conveying medium corrosion weight loss electrochemistry ion concentration
  • 相关文献

参考文献3

二级参考文献74

  • 1刘景军,孟靖颖,李效玉,林玉珍.DELPHI在金属材料流动腐蚀研究中的应用[J].腐蚀科学与防护技术,2005,17(5):340-344. 被引量:2
  • 2代真,段志祥,沈士明.流体力学因素对液固两相流冲刷腐蚀的影响[J].石油化工设备,2006,35(6):20-23. 被引量:30
  • 3Harvey T J, Wharton J A, Wood R J K. Development of synergy model for erosion-corrosion of carbon steel in a slurry pot [J]. Tribology-Mat. Suf. Interface., 2007, 1(1): 33-47.
  • 4Kermani M B, Harrop D. The impact of corrosion on oil and gas industry [J]. SPE Production Facilities, 1996, 11: 186-190.
  • 5Poulson B. Complexities in predicting erosion corrosion [J]. Wear, 1999, 233-235: 497-504.
  • 6Rajahram S S, Harvey T J, Wood R J K. Erosion-corrosion resistance of engineering materials in various test conditions [J]. Wear, 2009, 267: 244-254.
  • 7Clark H M, Hartwich R B. A re-examination of the ‘particle size effect’ in slurry erosion [J]. Wear, 2001, 248: 147-161.
  • 8Zhou S, Stack M M, Newman R C. Electrochemical studies of anodic dissolution of mild steel in a carbonate-bicarbonate buffer under erosion-corrosion conditions [J]. Corros. Sci., 1996, 38(7): 1071-1084.
  • 9Guo H X, Lu B T, Luo J L. Interaction of mechanical and electrochemical factors in erosion-corrosion of carbon steel [J]. Electrochim. Acta, 2005, 51: 315-323.
  • 10Tian B R, Cheng Y F. Electrochemical corrosion behavior of X-65 steel in the simulated oil sand slurry. I: Effects of hydrodynamic condition [J]. Corros. Sci., 2008, 50: 773-779.

共引文献92

同被引文献17

引证文献2

二级引证文献5

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部