期刊文献+

一种寻找潜力油层的测试新技术——电缆输送自排液式分层测压取样器(AFT)

A Novel Test Technology for Finding Potential Reservoir--Cable Conveyed Self-drainage Advanced Formation Tester
原文传递
导出
摘要 为了在高含水或特高含水采油井中寻找未充分动用的剩余油储层,提高单井产量,研究了一种寻找潜力油层的测试新设备——电缆输送自排液式分层测压取样器(AFT)。该测试设备在新疆克拉玛依油田、大庆油田、华北油田及延长油田测试17口井73个层段,共找出24个潜力层段,5口井采取堵水措施后,每天增油约20t,单井最高增油10倍以上。该技术的现场应用表明,在多层合采的高含水或特高含水采油井中,利用该技术可找到数量可观的相对低含水的潜力油层,为油田调整挖潜提供依据。 In order to look for reservoirs with available remaining oil in high water-cut or ultra-high water-cut wells and increase single well production,a novel type of test technology for finding the potential reservoir,namely cable conveyed self-drainage advanced formation tester(AFT)was developed.The technology had been tested 17 wells with 73 intervals in Karamay Oilfeld,Daqing 0ilfield,Huabei Oilfield and Yanchang Oilfeld,and 24 potential intervals had been found totally.After being used the water shutoff treatment in 5 wellls,the daily oil production increment was about 20 tons,and maximum oil production per well increased more than 10 times.Field applications showed that substantially potential oil layers with relatively lower water-cut could be found in the high water-cut or ultra-high water--cut oil wells by the commingled production,laying basis for adjustment and exploitation of oilfield.
作者 张志文 徐上 刘波 Zhang Zhiwen;Xu Shang;Liu Bo
出处 《采油工程》 2016年第1期71-74,86,共5页 Oil Production Engineering
关键词 地层测试器 AFT 分层测试 层间干扰 潜力油层 formation tester AFT separate layer test interlayer interference potential reservoir
  • 相关文献

参考文献2

二级参考文献25

  • 1李晓芳,杨晓翔,王洪涛.封隔器胶筒接触应力的有限元分析[J].润滑与密封,2005,30(5):90-92. 被引量:43
  • 2TRELOAR L R G. The physics of rubber elasticity [M]. 3rd ed. Oxford: Clarendon Press, 1975.
  • 3BEATTY M F. Topics in finite elasticity: Hyperelasticity of rubber, elastomers, and biological tissues-with examples[J]. Appl. Mech. Rev., 1987, 40(12): 1699-1734.
  • 4MORMAN Jr K N, PAN T Y. Application of finite element analysis in the design of automotive elastomeric components[J]. Rub. Chem. & Tech., 1988, 61: 503-533.
  • 5CHARLTON D J, YANG J. A review of methods to characterize rubber elastic behavior for use in finite element analysis[J]. Rub. Chem. & Tech., 1994, 67: 481-503.
  • 6DAVIES C K L, DE D K, THOMAS A G; Character- ization of the behavior of rubber for engineering design purposes. 1. stress-strain relations[J]. Rub. Chem. & Tech.,1994,67: 716-728.
  • 7NICHOLSON D W, NELSON N W, LIN B, et al. Finite element analysis of hyperelastic components[J]. Appl. Mech. Rev., 1998, 51(5): 303-320.
  • 8ASTM. D412 Standard test methods for vulcanized rubber and thermoplastic elastomers-tension[S]. West Conshohocken: ASTM International, 1998.
  • 9XIA Yong, LI Wei, XIA Yuanming. Study on the compressible hyperelastic constitutive model of tire rubber compounds under moderate finite deformation[J]. Rub. Chem. & Tech., 2004, 77.. 230-241.
  • 10XIA Yong, DONG Yi, XIA Yuanming, et al. A novel planar tension test of rubber for evaluating the prediction ability of the modified eight-chain model under moderate finite deformation[J]. Rub. Chem. & Tech., 2005, 78. 879-892.

共引文献67

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部