期刊文献+

双流道叶轮内湍流的三维数值模拟 被引量:10

3-D Numerical Simulation for Incompressible Turbulent Flow in the Impellers ofDouble-channel Pumps
下载PDF
导出
摘要 对双流道泵叶轮内三维不可压湍流流动进行了数值模拟。计算采用了雷诺时均N-S方程和修正了的k-e湍流模型,计算在体贴坐标系和交错网格中进行并采用了SIMPLE-C算法。计算结果揭示了双流道泵叶轮内湍流流动的压力分布和速度分布规律。研究结果可以用来对双流道泵进行性能预测并为双流道泵的优化设计创造了条件。 The 3-d turbulent flow in the impellers of double-channel pump issimulated in this paper. By using the time-averaged N-S equations and the k-eturbulent model modified to consider the curvature and rotation, applying SIMPLE-Calgorithm to make pressure-velocity correction equation, the calculation is carriedout with Body-fitted Coordinated grid. The calculated velocity and pressuredistributions of the turbulent flow in double-channel pumps are given for the firsttime, which will be supportive to the optimal design and performance prediction ofdouble-channel pumps on the basis of flow field simulation.
机构地区 江苏大学
出处 《排灌机械》 2002年第4期5-8,共4页 Drainage and Irrigation Machinery
基金 本项目为教育部留学回国人员科研启动基金资助项目。
关键词 三维数值模拟 双流道泵 叶轮 湍流 计算流体动力学 Double-channel pump,Impeller,turbulent flow,Computation fluiddynamics(CFD)
  • 相关文献

参考文献5

  • 1刘厚林,关醒凡,李幼康.双流道叶轮的设计方法[J].流体机械,1999,27(9):15-17. 被引量:24
  • 2袁寿其,陈池,郑铭,李昳.无过载离心泵叶轮内三维不可压湍流场计算[J].机械工程学报,2000,36(5):31-34. 被引量:36
  • 3[4]Tourlidaks A. Numerical modeling of viscous turbo-machinery flow with a pressure correction method. [Ph. D. Thesis], England: Cranfield Univ.1992
  • 4[6]Rodi W. Turbulent models for practical applications, lecture presented at short course (Introduction to the Modeling of Turbulence).Held at the Von Karman Institute for Fluid Dynamics Belgium, June 10~11,1985
  • 5陶文铨.数值传热学.不相上下安[M].西安:西安交通大学出版社,1988..

二级参考文献9

共引文献63

同被引文献55

引证文献10

二级引证文献98

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部