AMP30高速镦锻机工作循环图分析

Analysis on working cycle of high speed upsetting machine type AMP 30

把曲轴曲柄转角α作为横坐标,把主滑块行程s作为纵坐标,把曲柄处于最上位置时的α=0°、S=0定为原点,建立α—s 关系曲线,并由此列出机床其他运动部件的运动状态及其相位角表。根据图表分析了各运动部件的运动规律。附图1幅,表1个。

Taking the crank turning angle a of crank shaft as abscissa,the stroke 5 of slide block as ordinate,and the top position of crank while a=0 s=0 as the original point, then the a-s curve can be set up, the motion condition and the phase angle of other moving parts of high speed upsetting machine can be also listed. According to above chart, the motion rule of every moving parts of the machine is analysed.