期刊文献+

风荷载测试与模拟技术的回顾及展望 被引量:47

REVIEW AND PROSPECT ON MEASUREMENT AND SIMULATION TECHNIQUES OF WIND LOAD
下载PDF
导出
摘要 对大跨度桥梁、大跨空间结构、高层建筑、高耸塔桅结构等建筑物和构筑物而言 ,风荷载是结构抗风设计、防灾减灾分析的控制荷载之一。风与上述结构间的相互作用十分复杂 ,可通过风洞试验、现场实测、数值模拟等方法获取详细可靠的风荷载数据。本文简要介绍了大气边界层风特性与风荷载作用特点 ,回顾了结构风工程中风洞试验与现场实测的基本情况 ,讨论了风荷载时程的各种数值模拟技术 。 Wind load is one of the dominating loads which must be considered in the design of structural wind-resistance as well as the analysis of disaster reduction and prevention for structures such as long-span bridges,large-span spatial structures,high-rise builsings,towers and guyed masts.The interaction between such structures and wind at the boundaries may be very complex.Particular and reliable data of wind loads can be obtained by means of wind tunnel tests,field measurements and numerical simulations.This paper aims to introduce the wind proprieties and wind effects in the Atmospheric Boundaty Layer,to review the general situation of wind tunnel tests as well as field measurements in structural wind engineering,to discuss the numerical techniques for the simulation of wind loading time series and to prospect the trends of future research in this field.
出处 《振动与冲击》 EI CSCD 北大核心 2002年第3期6-10,25,共6页 Journal of Vibration and Shock
关键词 风荷载 风洞实验 随机过程 数值模拟 风特性 测试技术 结构设计 建筑物 wind load,wind tunnel test,field measurement,stochastic process,numerical simulation
  • 相关文献

参考文献16

二级参考文献44

  • 1赵臣,张小刚,吕伟平.具有空间相关性风场的计算机模拟[J].空间结构,1996,2(2):21-25. 被引量:29
  • 2沈世钊,徐崇宝,陈昕.哈尔滨速滑馆巨型网壳结构[J].建筑结构学报,1995,16(6):16-20. 被引量:2
  • 3王肇民,颜明忠.桅杆结构横风向振动响应研究[J].建筑结构学报,1996,17(3):2-8. 被引量:3
  • 4E.Simiu 项海帆等(译).风对结构的作用-风工程导论[M].上海:同济大学出版社,1992..
  • 5张相庭.结构风庭与风压计算[M].同济大学出版社,1985..
  • 6埃米尔.希缪 刘尚培译.风对结构的作用[M].同济大学出版社,1992..
  • 7楼文娟 孙炳楠 等.大跨越输电铁塔的气动弹性模型及风洞试验.第二届结构与地基国际学术研讨会论文集[M].香港,1997.383-388.
  • 8陈勇 楼文娟 等.基于windows的多点脉动风风速时程模拟[J].浙江大学学报,1997,31:147-152.
  • 9向阳.薄膜结构的初始形态设计、风振响应分析及风沿实验研究(哈尔滨建筑大学博士学位论文)[M].,1998..
  • 10张相庭,结构风压和风振计算,1985年

共引文献674

同被引文献469

引证文献47

二级引证文献191

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部