期刊文献+

两级串级拉曼全光纤激光器的数值模拟及分析 被引量:8

Numerical Simulation and Analysis of Two Cascaded Raman Fiber Laser
原文传递
导出
摘要 用双通结构理论对采用光纤光栅做腔镜的两级的串级拉曼激光器进行了数值模拟。在此基础上,分析了光纤长度、谐振腔损耗及输出镜反射率等因素对两级掺磷全光纤拉曼激光器的输出功率、阈值、斜率效率等输出特性的影响,并给出了串级拉曼激光器的优化设计参数。 The two cascaded Raman fiber laser using fiber Bragg gratings as cavity mirrors was theoretically simulated and analyzed by use of the double pass configuration. The effects of fiber length, excess loss and output reflectivity on the output characteristics of two cascaded Raman fiber laser, such as output power, slope efficiency, and threshold power were studied on basis of numerical simulations, and the optimized parameters were given.
出处 《中国激光》 EI CAS CSCD 北大核心 2002年第9期773-776,共4页 Chinese Journal of Lasers
基金 国家自然科学基金(69877006)
关键词 两级串级拉曼全光纤激光器 受激拉曼散射 双通结构 数值模拟 SRS RFL stimulated Raman scattering, double pass configuration, numerical simulation
  • 相关文献

参考文献4

  • 1J. A. Yeung, A. Yariv. Theory of cw Raman oscillation in optical fibers [J]. J. Opt. Soc. Am., 1979, 69(6):803-807.
  • 2M. Haelterman, S. Trillo, S. Wabzitz. Dissipative modulation instability in a nonlinear dispersive ring cavity[J]. Opt. Comm., 1992, 91:401-407.
  • 3V. I. Karpov, E. M. Dianov, V. M. Paramonov et al..Laser-diode-pumped phosphosilicate-fiber Raman laser with an output of 1 W at 1.48 μm [J]. Opt. Lett., 1999, 24(13) :887-889
  • 4Nam Seong Kim, Mahendra Prabhu, Cheng Li et al..1239/1484 nm cascaded phosphosilicate Raman fiber laserwith CW output power of 1.36 W at 1484 nm pumped by CW Yb-doped double-clad fiber laser at 1064 nm and spectral continuum generation [J]. Opt. Comm., 2000,176:219-222

同被引文献51

引证文献8

二级引证文献19

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部